Setting MMS on Android: a step-by-step guide for various operators.

Configuring MMS on Android may be required in two cases. The first of these is the purchase of a new smartphone. The second is the reset of existing parameters to the factory ones. In any case, you need to change the configuration so that this service is working. This can be done in four ways:

• Automatically.
• With the help of the service center operator.
• By entering the required values ​​manually.
• Using the regional operator's website.

All these methods will be considered in detail in the framework of this material.

Automatic configuration

Automatic setting of MMS on Androidoccurs with minimal human participation - this is its main plus. But the drawback is that it can be done only once - at the first registration device in the mobile operator's network. After that it is considered that everything is configured and there is no need to resend these data. The order of its following:

• Install the SIM card in the corresponding smartphone slot and collect it.
• Turn on the device and, if necessary, enter a PIN code.
• Once registration is completed, the search for the required values ​​in the operator database starts. After they are found, this information is sent to the gadget.
• Then the subscriber must accept the configuration profile and save it.

This completes the automatic setup process. But the process of sending and receiving messages can be blocked. The activation procedure will be described further in the text.

Operator help

Unlike automatic, the MMC setting onAndroid with the help of the service center operator or by manual input can be done many times - this is their plus. But on the other hand in the process of their implementation, you need to perform certain manipulations, which slightly complicates the configuration process. Each of the operators has a free consultation number. For Beeline it's 0611, for MTS it's 0890, for Mega-phone - 0550. Further, following the instructions of the autoinformer, you need to establish communication with the operator and order the necessary settings, which will then be sent to your smartphone. Then they need to be accepted and saved. It is recommended after this operation to make a full reset of the device, that is, turn it off and on. In some cases, activation of the service may be required. To do this, during the call, the operator is requested to enable this service for this number. At this, the MMC setting on Android with the help of the service center operator is over.

Manual input

It is not always possible to callservice center, and MMS need to be urgently received. In this case, the necessary settings can be set manually. To do this, go to the following address: «Applications» «Settings» «Networks» «More» «Mobile networks» «APN». Then you need to enter the parameters of the operator - this is the actual manual setting of MMS on Android. Beeline, for example, requires the following parameters:

• The profile name must be Beeline MMS.
• The home page in this case is http: // mms /.
• The data transmission channel is GPRS.
• The access point is mms.beeline.ru.
• The IP address is 192.168.094.023.
• Port - 8080 (on some models can be used 9201).
• The user name and password are the same - beeline.

The remaining values ​​remain unchanged. For MTS it is necessary to enter such data:

• The name of the profile is MTS Center MMS.
• The APN must be mms.mts.ru.
• Login and password in this case are identical - mts.
• Homepage - http: // mmsc.
• The IP address is 192.168.192.192.
• Port - 8080 (on some models can be used 9201).

As in the previous case, we leave all other values ​​unchanged. Setting the MMS The megaphone on Android requires the following values:

• The profile name is megafon.
• APN depends on the tariff plan. Here you need to see the documentation that came with the launch package.
• The login and password in this case are identical - gdata.
• Homepage - http: // mmsc: 8002.
• The IP address is 10/10/10.
• Port - 8080 (on some models can be used 9201).

All the rest is not touched and left as is.

Another way ...

Another way to get the settings is to orderthem on the operator's regional website. To do this, on a computer connected to the Internet, through the search engine, we find the page we need. Then select the model of the smartphone and enter the captcha and mobile number. Then click "Send". Within 5 minutes, the necessary information will be obtained. We save and set the necessary profiles. If within 5 minutes the requested information was not received, it is better to repeat the order on the same regional mobile operator's website. Also, it is recommended to do a full reset of the phone. After that we send and receive MMS. Problems should not arise. If something does not work, look for the error. As practice shows - somewhere they did something wrong. You can delete the old profile and do everything again.

Outcomes

In this article, we described step by step howset MMS on Android for different operators. As can be seen from everything previously said, nothing is complicated in this. With this task, no problem can cope with the lucky owner of a new smartphone. It is enough just to follow all the instructions, and you should not have problems with this procedure.