Why there is no sound on the computer

It is quite difficult to imagine modernA computer that does not have the ability to reproduce a full sound. This is understood by motherboard manufacturers and has long integrated sound solutions into their products. Actually, that's why the popularity of discrete sound cards is now lower than ever. Many software products simply refuse to run if there is no sound output device in the computer configuration, but this, of course, is an extreme. Of course, all of the above applies to the usual (home, multimedia) computers. Narrowly specialized (in ATMs, ticket offices) is not considered.

If there is no sound in the computer, then for mostusers are like a disaster. In fact, there are no reasons for concern: modern integrated codecs rarely fail, so to restore efficiency, a little free time, access to the Internet and, of course, the desire to figure out everything.

So, why is there no sound on the computer? The reasons can be very diverse, so at once you definitely can not say anything. To answer the question of why there is no sound on the computer, you need to consistently check the entire sound system. The obvious action, which, for some reason, is sometimes ignored by users is the checking of speakers. Columns include, on the glow of the light bulb are convinced of their performance, but the wire connecting the speakers and the computer is forgotten. Sometimes it is hurt by foot or something else during cleaning, as a result, the user begins to search the forums for an answer to the question of why there is no sound on the computer. You need to check if the speaker plug is pulled out of the green connector of the sound card. Sometimes it is inserted partially, so there is no sound.

The next possible reason is incorrectaudio setting on the computer. Modern maps have long learned how to output multi-channel sound. If the speakers are exactly the same, but Stereo mode is set in the driver settings, some channels will not work. Check here: "Start - Control Panel - Sound - Configure". In general, this is a universal rule: the configuration of the columns and the settings must match.

Users interested in why there is no soundon a computer, it may be interesting to know the statistics according to which the main problems with sound are associated with the driver. If several sound cards are installed in the computer, the one to which the speakers are connected must be assigned. Follow the above path, specify the desired playback device and click "Default".

The next reason is problems with the driver itselfsound card. Beginners may not know that in order for a new computer to play sound, you need to install the appropriate driver. It can be found on a disk that goes with the motherboard (computer). If there is no such disk, then you will have to open the instructions to the motherboard, find the name of the sound solution in the specification and download the driver from the Network.

In some cases, an amazingcoincidence: the driver is installed, but there is no sound. This happens because of a mismatch between the sound card and the driver. It is required to reinstall the latter. However, this is a rather rare phenomenon.

One of the most common causes -software mute. It is solved very simply, but only by those who know where and what to press. In the lower right corner of the desktop there is a speaker icon. Click on it with the left mouse button and check that the slider is not at the bottom. Slightly below the slider there is a picture of the column, if there is a crossed out sign on it, then the sound is turned off: we press once on it and the icon disappears - there is a sound!