Do you like a bear of tires? How to make it, learn here
Today, the distribution of old tiressecond life. Of them make charming swans, parakeets, snails, elephants. It is possible to create pretty flower beds. Another original ornament for the garden is a bear made of tires. How to make this unusual decoration? What will it take to work? What secrets do you need to know? For all these questions, you will find answers in this article.
For the creative process you will need:
- four tires: one more (trunk) and three identical smaller (head, paws);
- pipe (for fastening the trunk with the head);
- a piece of plywood;
- a piece of linoleum;
- thick rubber (for ears and paws);
- paints (for street work);
- self-tapping screws;
- glue or liquid nails;
- a durable knife or a Bulgarian.
When everything is ready for work, we will find out how the bear is made from tires.
How to make a teddy bear?
We take the largest wheel and perform the following:
1. Apply to it a piece of plywood and measure such a section to cover the location of the tire disc.
2. Cut it with a grinder or a jigsaw.
3. Using self-tapping screws, fix the plywood to the tire. You can hold the silicone sealant around the circumference to keep the part better.
4. We glue a piece of linoleum.
5. By the same principle we act with the back side of the bear and the wheel for its head, cutting out from the plywood is no longer just a circle, but a figure in the form of a muzzle of a beast.
6. Now we connect the head to the stomach, making holes in the tires and putting a tube in them.
Bear of tires: how to make a head and paws?
When the torso is ready, proceed to the rest of the details.
1. Of the pieces of strong rubber, you need to carefully cut the ears and fix them on the tire with self-tapping screws. If you have a pair of old wheels from the stroller or something else, then they are also quite suitable for the ears.
2. From the rubber cut out the legs and screw them to the largest tire. If you have another small extra tire, then these parts can be made from it. Their length will be 1/3 of the wheel.
Bear of tires: how to make the right color?
If you are more comfortable painting horizontal surfaces than vertical ones, then do not fix the animal on the ground. Put it on the table and get to work.
Tires should be painted brown. The plywood will turn out to be light brown. On the linoleum, you can draw a figure with a black stroke in the form of a shaggy tummy. Around her paint a dark brown color, and the belly itself is again light brown. The muzzle becomes dark, leaving a light contour. Next, draw eyes, a nose, a smiling mouth, etc. Do not forget to color your ears. Then paint the animal from the back side.
When everything is dry, you can give the beast a barrel withhoney, wand or flowers. If in the center of the lower paws (whole wheels) plant plants, the product will look much nicer. Now you know how to make a bear out of tires.
