How to change a dog with a zipper on different things
Any clothes with a zipper - it's very convenient andPractical until a problem arises with a lightning or a dog. As a rule, this happens at the most inopportune moment and causes a lot of inconvenience. Often with such problems, girls, and not only, run to the atelier in order to replace the zipper completely. What is not always wise to do, because it will have to pay much more for this than with a simple replacement of the dog. Can I change the dog with a zipper at home?
If there is a problem with the lightning
If you are having trouble with a zipper onclothes or shoes, do not immediately rush to the atelier or shoe repair service. You can do it yourself at home, if you have a few minutes of free time and want to do this.
To begin with it is necessary to determine the root of the problem. What is the reason for the lightning to break or the lock is not fastened? This is very important, further action depends on this. Consider the main problems that can arise with these types of fasteners.
- Lightning diverges.
- The dog flew off the teeth.
- In a certain place, the dog does not fasten the zipper, but is simply removed from one side.
- When buttoning, the dog is not fixed, but flies off the lock.
If the zippers are not damaged, then the optimaloption is to replace the slider, do not immediately change the whole lock. This is a necessary action only in the situation when zippers with a zipper are torn out. How to change the dog with a zipper, we will consider below.
Problems with lightning
Lightning is a very popular and convenient typeclasp, which is used both for outerwear, and for suits, dresses, shoes and so on. It is used for children's clothes and adult outfits. How to change a dog with a zipper on his boots, if there is no time to visit the studio or the means do not allow it to be done at the moment?
It is not recommended to immediately start searchingA dog that can be removed from old clothes. The reason for this is simple: a new dog is worth a penny, everyone can afford to buy it. But if you put an old, formerly in use version, then the lifetime of it is very difficult to determine. Nobody can give you guarantees that you can no longer worry about the fact that the clasp will again have problems.
Types of zippers
The main types are one-sided or two-sided zippers. The second option can often be found on the outer clothing (jackets, down jackets, sweaters and so on). This is a very practical type of fastener.
As for the varieties of lightning bystandard sizes, there are countless of them, denticles on them can be large, medium or small. It depends on the type of clothes to which a similar type of fastener is applied. There are zippers-fasteners by the type of material from which they are made. So, you can find doggies-runners from metal or plastic. The second type is convenient and easy to use, but if you compare it with a metal dog, it is not so reliable and durable. The best option is a zipper with a metal runner, everyone knows it called "doggy." Even children of preschool age can cope with such fasteners, which adds to them pluses.
An alternative to these types of fasteners arebuttons or buttons. But while lightening saves you time. Professionals and not only distinguish the standard sizes of lightning by the number, which depends on their thickness.
What is needed to replace the dog?
How to change a dog with a zipper on a jacketon your own? This will take a few minutes, but it will save you a long time from the inconvenience caused by a faulty lightning. What is necessary in order to replace the dog? You will need the following:
- The new dog-runner is of the same type as the faulty version;
- needle and thread;
- scissors;
- pliers;
- knife or screwdriver.
After determining the cause of the lightning problem, you canto start replacing the dog. If the reason is not in the slider itself, but in the teeth of the lightning, you can try to rearrange the lower lock a little higher, if possible. This option is suitable for lightning on trousers, if several prongs have jumped out on it or they are damaged and do not allow fastening of the fly.
How to replace a dog with a zipper at home?
If you have prepared everything you need and are ready to replace the slider with a zipper, then you need to do this:
- We take a knife or screwdriver and take off the clothes on the limiter.
- After that, we put on a new dog.
- Put the limiter in place.
This algorithm applies to plug-in typesfasteners, which are used on hoods and jackets. On boots and shoes, too, are just such. If you do not work with lightning on a skirt or trousers, then the task is slightly complicated by the fact that in order to remove the limiter and put on a new dog it is necessary to first open the zipper in the place where it is sewn to the clothes. For this, it is best to use a blade or small sharp scissors. After installing the dog it will be necessary to sew again the end of the zipper.
As for the limiter, if it is lostcan be made by hand with the help of needles and threads. In the place where the lock is to be installed, we make several stitches that will not allow the dog to fly off while zipping.
Another option
How to change the dog with a zipper inside without removing the limiter? Some make its replacement as follows:
- Using a knife or a screwdriver, one edge of the dog is slightly opened so that it can be safely put on the zipper.
- The detail is worn on the teeth of the lightning.
- With the help of pliers, an open edge is pressed. Done!
A similar variant for the time of replacement is muchfaster, but you need to be very careful, because when you open the edge of the dog it can simply bend. Then you have to buy it again. Caution should be used when clamping it on the teeth of lightning. Do not over-tighten, because it can work badly or even break.
