In our country, installation andsetting up a satellite dish, as this type of television is gaining momentum every year and is becoming more popular. Usually this business is dealt with by specialized companies, but installation can be carried out with their own hands. The equipment is assembled according to the instructions, without causing any special difficulties. Careful attitude requires an antenna mirror, made of aluminum. After assembly work, make sure that all fasteners are secure. Especially if you configure the satellite dish yourself. In no case can not neglect the installation of a satellite convector, because it will depend on it the quality of reception.
To configure the satellite dishes did not develop intoa real torture, installation is recommended in easily accessible places. If you plan to be placed outside the window, you can drill a hole in the corner of the window frame for the cable. When located on the roof, low-current risers are often used. You can also pass the cable along the building's facade. The diameter of the holes should be slightly larger than the thickness of the wire, otherwise the outer shell can be damaged. At the last stage, work is under way to seal the holes.
It is interesting to set up satellite dishes withshifted focus, with an oval shape. Such devices allow several transducers to be installed to receive a television signal and receive several satellites at once. The fixing nuts should not be tightened to the end, because the antenna will have to be sent in different directions. First, a central satellite is sought and connected to the first input. Then, in the same way, are the rest. In fact, the order of connecting the converters is not particularly important. It is only necessary that the actual connection be matched to the displayed satellites in the menu.
Classic setting of satellite dishestaking into account the position of the sun. Usually at one o'clock in the afternoon a "plate" is sent to him, while the time zone and the time of the year must be taken into account. Further, it turns very smoothly until a reliable signal reception is detected. If there is no signal, it is recommended to lower or raise the antenna. And in the same way continue to look for a steady impulse. After a successful search, all fasteners are fully tightened. After a while, the receiver will automatically find all the TV channels.
Thus, we can say with confidence thatsetting up satellite dishes is nothing supernatural. With the right approach it will be possible to save a considerable amount by adjusting the equipment yourself. However, without a thorough study instructions can not do. Using the recommendations of specialists, you can watch your favorite TV shows and movies in an hour. Installation work can be considered complete when all channels calculated for this antenna diameter appear in a satellite tuner.
