Tricolor TV: setup, installation and proper use
Today, digital satellite television Tricolor TV has become very popular. To save on the total cost of Tricolor TV, tuning and installation can be performed independently.
In order to start installation, assembly andtuning this antenna, you need to have at hand: a wrench, a drill, a pencil, a cross screwdriver, a compass and a protractor. First of all, fasten the support to the transponder bracket. Pull the cable from the antenna into the house and connect it to the LNB IN jack. Then, according to the instructions, prepare the antenna cable. Satellite receiver and cable connect to the TV.
Now proceed to orient the antenna,sending the plate to the satellite. Once you turn on the receiver, it will be in the setup mode. In the Tricolor TV setting starts from the moment that two bars appear at the bottom of the screen. In satellite television, Tricolor TV tuning channels will depend on the quality and strength of the signals.
The correct Tricolor TV tuning will give in the receivergreen stripes. If this strip is not present, put an assistant on the TV that will correct your actions, or install a mirror that you can watch by adjusting the antenna. It is quite enough if the signal is within 70%.
Accurate Tricolor TV tuning will begin as soon asthe receiver will be turned on. At this point you will be offered to download the update of the channel list of Tricolor TV. After that you need to register your receiver by entering your passport data, home address, serial number of the receiver and the secret code from the card.
It is better to do this on the special site of Tricolor TV. Write all the data without abbreviations. Once the registration is completed, you will be notified of the contract number and you can activate the card.
Now let's take a closer look at how the Tricolor TV tunes the channels.
Once you enter the "Menu", select the button"Search channels." On the warning screen, select "Yes" and click "OK." At this point, the process of searching for the desired programs will start, and you will need to save them. Click "Yes" and "OK" again. After that, the programs that are included in the satellite TV package will begin to be configured.
Now proceed to the next step, in thethe result of which will instantly occur in Tricolor TV setting additional channels. To do this, select "Settings" in the menu and click "OK". A window will immediately appear where you need to enter your secret password: "0000" - press this button 0 four times. Then select "Manual search" and press "OK". In the "Frequency" item, position the cursor and activate the value "12111", press "OK". Start by clicking "Start Search", confirm with the "OK" button.
The receivers of the new generation should have more than 100 channels.