How do I access the TP-Link router and its settings?

In each of the instructions supplied with the routerTP-Link, there is an algorithm for configuring network equipment, but that's about solving connectivity problems - not a word. But without access to the software part of the router, the user will not be able to configure the device.

In this article, the reader will learn how to accessTP-Link router and in its settings. A complete algorithm of actions with a step-by-step solution of the arising problems will be offered. Naturally, to achieve the result, the user will have to use all the recommendations.

First inclusion

If we are talking about a completely new device,only purchased in the store and has never turned on, then the effectiveness of the connection directly depends on the settings of the computer. In fact, by connecting the wires correctly, as described in the instruction, the user can easily dock two devices.

Then the matter of technology: How to access the interface of the TP-Link router is indicated in the same manual. You must enter the IP address of the network device in the browser's address bar and specify the login and password when authorizing (they are identical - admin). This procedure is simple and does not require the owner of the router any knowledge in information technology.

Configured network equipment

There are situations when the user acquiresrouter, used. Here the situation can be resolved in several ways. Knowing how to enter the TP-Link router (if the seller has changed the factory settings and transmitted the information about the authorization to the customer), you can easily re-program the network equipment for yourself.

But there are situations when the user does not owninformation about the IP-address of the router, as well as about the login and password. The problem is solved simply - you need to reset the network equipment settings to the factory settings. This is done by a special Reset button, which can be found on the control panel. Further connection is made according to the instructions that come with the router. It also describes in detail how to access the TP-Link router.

Stealth providers

TP-Link products are quite popular amongproviders who provide network equipment to their customers for free (of course, the user must connect on a contract basis). Here, the situation for the owner is aggravated by the fact that programmers of organizations providing Internet access services often install their own firmware with their own authorization system. The password, of course, is not communicated to anyone.

Before thinking about how to access the modemTP-Link, the user needs to make sure of the desirability of his desires. In most cases, the router is already configured and provides both wired and wireless access to the Internet. But there are situations when you need to change the password on Wi-Fi or send ports. The problem is solved in several ways. You can ask the provider to change the settings or install the manufacturer's firmware.

Pitfalls in the software upgrade process

It would seem that it could be easier than downloading fromthe official website of the manufacturer firmware and install it on the router? But there is a problem. The fact is that the user will not be able to access the "Administration" tab in the device's control panel. You can hack anything, either programmatically or in hardware. The question here is different: do I really have to do this?

How to enter TP-Link router settings without knowingno login, no password? In addition, the network device itself has a non-standard firmware. Just. Find the IP address of the router and use a special utility to pour new firmware into the device. However, here there is other question: whether the provider will give to the client of adjustment to a network, having learned, that that uses not the firm device.

On the other side of the wire

Thinking about how to access the routerTP-Link, the user forgets that in addition to problems with the network device, inability to work can be caused by not making the computer "see" the router. The network card of any PC can be in three states: to be disabled, to work in a static mode or to obtain an IP address via DHCP. In the latter case, there should not be any problems with connecting network equipment. But with the first two states you have to figure it out.

The network adapter can be disabled by hardware andprogrammatically. If the device is not detected by the operating system, you need to go into the BIOS settings and enable it (or install the driver). And the software adapter is turned on through the control panel. Looking for answers to the question of how to access the TP-Link router, the user should not forget about the network settings.

User intervention

Go to the "Network Management Center", the owneryou should find the item "Changing adapter parameters". Next, the desired network connection is selected, and after calling the alternative menu of the selected icon, the user needs to go to the adapter properties. It's all simple. In the list of active components, you need to find the "IP version 4" menu and go to its properties.

In the menu that opens, the user needs toUndo the manual network settings by checking the box next to "Receive automatically". You need to do this for both the IP address and DNS. In general, before you go to TP-Link WR841N or any other network equipment, it is better to immediately make sure that the computer is configured to automatically obtain the address and domain name of the server (DNS).

Finally

As can be seen from the review, nothing complicated inThere is no connection of the router to the computer. Yes, you need to spend more time on unnecessary procedures such as resetting, flashing network equipment or changing the settings of a personal computer. But these are ready-made solutions that really help any user to solve connection problems.

Wondering how to access the TP-Link router,any owner should understand that in most cases (the probability of 99% is guaranteed) the solution of the problem directly depends only on him. And, of course, from knowledge that will always help to solve any task posed.