If the monitor is flashing

Although the manufacturers of components for computersystems tend to ensure the reliable operation of their products, sometimes there are situations when the equipment begins to behave "somehow wrong". In the world there is nothing absolutely reliable, and the most sophisticated high-tech products are not an exception.

Thus, if the monitor is flashing, it is not worth itto panic. The reasons can be very different: from the banal, like the table leg on the signal cord; up to a complex damage to the impulse power supply unit. And if you do not know why the monitor is flashing, then you yourself have to perform a minimal complex of diagnostic measures - the "sacred duty" of each user. And only after that carry the "suspect" in the repair.

It often happens that the master from the service center, oneyes of the amazed owner of the "faulty" monitor, turns on the device and ... does not observe any malfunctions. Almost half of these appeals end. And the monitor flashes for a different reason, which you should not look for in it. It's hard to say what is more unpleasant for the device owner in such a situation: pay for pressing the power button or blush, feeling ... not understanding. By the way, if the laptop monitor flashes, then all of the above is also true for it, except that the list of reasons is slightly different.

They can all be divided into two groups: hardware(really existing) and software (virtual). And, since the monitor is a window into a non-existent world, the second group can also partially affect the performance. Let's start with the first.

So, the most trivial reason is the problem withwire connecting the monitor input and video card output. Factory marriage in conductors is rare, so most of the wine is on the conscience of the owner, who, when connected, forgot to tighten the fixing bolts on the plugs on both sides. It is enough to "disturb" such a wire by pushing the system unit, moving the table or somehow to one day see that the monitor is flashing.

The next possible cause is a video card malfunction. It is possible that its cooling system due to pollution has become ineffective to work - hence the overheating and abnormal operation.

Also, many still remember the "illness" of some chipsNVidia, which had a defect in soldering and eventually began to malfunction. It is possible that the video adapter has become unusable processor or memory. It is necessary to verify the performance with another video card.

But if the monitor flashes when it is turned on, then this can indicate a complex breakdown. Here is the list of the most common:

- the resource of backlight lamps in the liquid crystal display device is developed. Only replacement. Alas, usually work is more expensive than new spare parts, so you need to find generous masters;

Capacitors flowed in the power supply. A replacement is necessary;

- damage in the matrix itself. One of the most difficult breakages.

Independently trying to determine the cause, you needdo not forget about the software component. Incorrect mode, failure to set the scan frequency, driver error - all this can affect the operation of the monitor in the most unpredictable manner. It is necessary to boot into "Protection from failures" and check up working capacity.