How to set up "Tricolor TV" yourself
You finally got yourself a "plate". In the store, you immediately offered a service for its configuration and installation, but you, mindful of the fact that you need to save money, decided to abandon the services of specialists and set up channels "Tricolor TV" yourself.
The idea, of course, is commendable, worthyall approval. In the box with the equipment, you found the instruction and decided to follow its instructions exactly. Since the antenna is stored in a box in disassembled form, before you ask yourself how to set up "Tricolor TV" yourself, you need to collect it. In the assembly itself, there is nothing particularly complicated. The plate is not disassembled, so you need to assemble the mount and attach the transponder to the bracket. Once you do this, it's time to move on to the second stage - installing the antenna.
It is necessary to find out exactly where it will beyour antenna is oriented. This is not an ordinary television antenna, but a satellite dish, and you need to orient it to a satellite. In the manual, we read that we need Eutelsat W, which spins around the Earth at 36 degrees east longitude. Hence, it is necessary to orient the antenna so that the satellite signal does not screen anything.
Residents of private homes are easier - they can simplyput the "plate" on the roof, and then by tying the orientation of the adjustment. In the city this will not work for the simple reason that the roofs have long been occupied by pigeons and ordinary antennas. Besides, you will not be able to guard your plate around the clock, and your revolutionary-minded neighbors will quickly expropriate it. And in this case, you absolutely will not be interested in how to set up "Tricolor TV" yourself.
For this reason, the vast majorityowners of satellite dishes prefer to install them on their own balconies. If you do not have a compass at home and you have not been engaged in tourism and sport orienteering in your childhood, the best way for you to just look at how similar equipment is installed in your neighbor. And just set and orient the plate yourself.
On how to drill the walls and screw the screws, youfor sure you know yourself, so there is no need to describe this process in detail. So with the mount you can do it on your own. Just do not tighten all screws tightly, leave a slight backlash. You will need it for tuning the antenna "Tricolor TV". How to set up the channels, the instructions say, but for now you need to connect the cable to both the antenna and your TV. This operation also does not require brainstorming, so the description of the process does not need to be detailed. According to the instructions, we connect the receiver and connect everything to the network.
Now it's time to learn how to set up"Tricolor TV" yourself. In the instructions that lie before you, this is not written, so you knowingly began to read this article. Enter the receiver setup mode (this will happen automatically, immediately after you connect it to the network), then start moving along the arrow to the right until two bands appear at the bottom of the screen. One of them shows the strength of the signal, and the other - its quality. Your task is to ensure that both of these bands become green.
Carefully, literally moving the millimeterplane plates in different directions, catch then its position, in which the stripes turn green. Now you need to fix the antenna in this position, tightening properly all the fasteners. All. We answered the question about how to set up "Tricolor TV" yourself. Now you can proceed to register your equipment. You can do this either by phone or on the company's website. Register, customize channels and enjoy the abundance of programs and image quality.
