How to weave an owl of rubber bands on a machine, on a slingshot, on a hook?

Sometimes needlewomen want to do somethingunusual, somehow decorate their bracelets, to surprise and please their crafts by others. One of the most popular ornaments is a figurine of an owl made of rubber bands.

The owl is considered a wise and majestic bird. An amulet or a bracelet with an owl woven from rubber bands, you can give yourself strength and wisdom. It is not difficult to create a real guard against many misfortunes with your own hands. So, how to weave an owl out of rubber bands?

Determine the nature of the craft

Interested in how to weave an owl out of rubber bands? For weaving a small sovenca, use a classic machine or a small device "Monster Tail." You can make a sheep with a slingshot or fork. In order to weave a voluminous owl from rubber bands, use the technique of weaving with a hook - lumigurumi.

How to weave an owl out of rubber bands on a slingshot?

A beautiful and cute toy can be woven withusing a slingshot. Owl can be used as a key fob. For work use elastic bands of any color, but experienced masters advise to choose brown and gray shades. What can I need? In the process use:

• special slingshot;
• hook for removal;
• gums of red color (main) - 44 pcs .;
• white gum (for weaving the abdomen) - 8 pcs .;
• orange (for making beak and legs) - 4 pcs .;
• black (for making an eye) - 2 pcs .;
• scissors.

Completing of the work

Many people are interested in how to weave from elastic pattern. Owl on the slingshot is twisted in two steps. First, prepare the gum for the trunk of the owl, weave it according to the scheme, and then go to the head.

Trumpet trunk

The first red gum should be thrown in threeturn to the right column. Then put two redheads on two pins. After that, the initial rubber band is thrown out of three turns into the center. Release the right column - transfer the rubber bands to the left side).

Paw shawl paw

One orange gum turns 4 times onright side of the slingshot. 2 redheads are worn as usual. Orange from 4 turns should be lowered on elastic bands. From the left column, the lower 2 pairs should also be sent to the center, so that the orange one appears from them on the right. After that, 2 redheads are thrown again, and the lower ones are sent to the middle. The second pair of redheads is put on 2 columns, the lower ones are sent to them. The third pair is thrown on both sides of the slingshot, the lower ones are thrown into the center. Then gum should be transferred from the left side of the slingshot to the right. Further, the hook is inserted into the initial rubber band from 3 turns, after which it is thrown on the left column.

Shave belly

Throwing 2 white gum, send a tripleelastic in the middle. The second white pair is worn similarly, the bottom white ones descend from the columns. The third and fourth pairs are also weaving. White gum is transferred from the left side to the right. The hook is once again inserted inside the initial triple band, which is put on the left pin.

Then 2 red gum put on both columns, 3the left turn is sent to the center. The left gum is transferred to the right, four turns of orange rubber bands are wound onto the left spine. They throw another pair of redheads, after which they drop the orange from the pin.

From the right column it is necessary to throw off 2 top pairsred so that the orange is left. Then, 2 redheads are put on, and the previous ones are sent to the center. Again, put on a pair of redheads and from both columns lower the previous ones. The next pair is also worn, and the previous ones are discarded from the columns.

With the help of the following pair of red gums connect all together, i.e. the pair is put on both sides of the slingshot. The lower gum is sent from the slingshot into the middle of the weaving.

Shave your head

Elastic bands should be arranged in a schematic. A pair of redheads from the right row are worn in the usual way, the lower ones fold in the middle. Then the next pair is put on, and the lower ones again go to the center. Left gum should be moved to the right.

Eye Shadow

The black rubber band is folded 4 turns to the leftpin. Again, a red-haired couple is thrown and black rubber bands are removed on it in 4 turns. Also, both lower pairs are sent to the right, but so that the black is left. Next, another 2 red gum springs, while the lower ones go to the middle.

After that, the left column should be freed,having transferred from it elastic on the right. The hook is inserted into the loop, from which the weaving began. On the hook, 2 orange hinges are thrown. Through the loop, the second part extends and also throws itself onto the hook, from which orange hinges are lowered onto the left spine.

Next on both columns is put on a pair of redheadsgum, they are removed orange. Erasers are transferred from left to right. The hook should again be inserted into the initial loop, a pair of red loops on the hook, stretching one side, and the other on the hook. Elastic bands should be lowered from the hook to the left column. Put two red loops on both columns. 2 pairs of red on the left to go down to the center of work.

On the right column, you should pick up the 2 uppergum and transfer them to the left. Black rubber band to throw in 4 turns on the right side of the slingshot. Next, a pair of ginger rubber bands are put on both columns and the black turns go down. On the left side of the slingshot, all the bands are dropped so that the black one is on the right of them. Wearing a pair of red, the previous should be sent to the middle.

Next, all the gum on the slingshot should be connected,One red put on two bars, all the rubber bands from the slingshot send to the center. Then one of the elastics is transferred to the next column. The lower one descends to the center. The loop should be tightened properly.

Brush wipe

The hook is inserted into the upper left loop of the head andThrough it stretches one red gum, a loop is made. The same is repeated on the left side. Then you should pull off each of the prepared rubber bands and cut off about half with scissors.

How to weave an owl out of rubber bands on the machine?

This way masters believe, perhaps, the mostsimple of all known. But not everyone knows how to weave an owl out of rubber bands, using the machine. To do this, first, you need to choose the appropriate color gum to make an owl, and then proceed according to the scheme: successively tuck the rubber bands on the corresponding bars of the machine.

Then the elastics from the column drop off andintertwined with each other. The process of weaving the owl on the machine is to throw off and put on the rubber bands. As a result of the steps taken, a wicker toy is produced: after removal of the machine, the elastic bands are pulled together. The owl is ready!

Owl made of rubber bands 3D

Many people are interested in how to weave a 3D-owl made of rubber bands. For this, we use the technique of weaving lumigurumi. This is a very popular method of weaving various figures and bracelets from rubber bands, which is based on amigurumi.

The difference between these Japanese kinds of needleworkis that amigurumi is knitting toys in a circle with the use of a hook and thread, and hooks and rubber bands are used in lumigurums. How to weave an owl out of rubber bands on a hook by Lumigurumi method?

Progress: the main part

In the process of weaving will have to use:

• elastic bands of different colors;
• crochet;
• filler for toys.

According to experienced masters, such a toyit is easy enough to be used, it will not take much time to make it. A significant advantage of this method is that one solid part is composed, consisting of a body, head and ears. The exception is the wings, eyes and beak of an owl. The work begins from the bottom, for this, using a green rubber band, a special ring of six loops is formed.

In the second row weaving should be slightly increased,so there twelve bands are twisted, two through each loop. Then again you need to add, but through one loop. Green rubber bands need to weave one row with an increase. The result should be 24 loops. The series is padded with the addition of every third loop.

The next series is played without adding, justweave 24 gums in all rows. As the owl should turn out to be a strip, change the rubber bands after every two rows. In total it is necessary to weave sixteen rows.

How to weave eyes?

To do this, you need gums of white and black colors. First you need to make a ring of six black loops. Then one row weaves two whites in each loop.

How to make a beak?

Throw orange gum three timeshook, and then put it on two of the same gum. One end should be left loosely down. Then another pair of rubber bands is passed, the hanging rubber bands return to the hook. On the hook, another pair is thrown, which is dragged through the first two loops. Erasers are collected into one.

Eyes are sewn with a conventional seam, while using rubber bands of any of the available colors.

To attach a beak, you must drag inside one end of the rubber band first, and then stretch the second end, retreating the loop, and fix inside the orange rubber band.

Wings

To weave the wings of an owl, we must forma ring of six green rubber bands. Next, we have to weave two rows of twelve elastics, making an increase in each loop, and the color should be changed every two gum. At the end, the wings are attached.

Final Actions

At the last stage, the owl is filled with sintepon andsew your head. In this case the ears will form themselves. In the corners it is necessary to stretch three orange gums, making nodules from them. Rubbers are cut, resulting in the formation of brushes.