Knitted stitch in knitting: types and correct execution

Ready-made knit looks neat onlywith the correct implementation of a number of rules. Their list includes the assembly of canvases. The choice of the required connecting seam directly depends on the thickness of the yarn and the pattern of the product.

Horizontal knitted seam ("loop in loop")

Ideal for joining parts,made hosiery. Without violating the structure of the material, it retains its elasticity. To ensure that the hinges do not loosen during work, the sheet is laid freely, several rows are threaded along its edge by an additional thread, after which it is stripped off. Additional rows are disbanded before stitching.

We perform a horizontal knit stitch in knitting:

• from the wrong side in the direction from the bottom up, insert the needle into the 1st loop of the lower row;
• from the front to the wrong side, the needle is directed to the first loop of the upper row (from top to bottom), and from the bottom up to the second loop of the upper row;
• insert the needle from top to bottom from the front to the wrong side into the 1st loop of the bottom row and output from the bottom up into the 2nd loop of the bottom row;
• again we enter the instrument from top to bottom into the 2nd loop of the upper row, and we need to output it to the next loop next to it, from the bottom up.

Then we sew in the same way.

Hinges should be the same size as in the main canvas, do not tighten the thread - and get an inconspicuous seam.

Horizontal knitted suture is good for assemblyproducts, connected with a pattern of elastic 1 x 1. And it is done this way: first only sew the front loops on one side of the fabric, then turn it inside out and repeat the process.

The horizontal seam is also used to connect the open longitudinal loops with the edge tabs of the transverse webs (when sewing sleeves). For this:

• The sleeve is pinned with pins to the product, aligning the intended middle of the part with the shoulder seam;
• start the assembly from the right edge on the front side;
• In the open hinges of the sleeves, a needle is inserted and the arcs of the main web following the edge are inserted.

Vertical knitting stitch in knitting

It is often called "mattress". It is used, as a rule, for joining details along the edges of a knitted fabric, is performed on the front side. Before assembly, the product does not need to be sheared or smeared.

Each edge loop combines two knittedseries, two transverse threads approach it. It is necessary to sew consistently, connecting one row to another, not missing a single thread. The needle works from right to left. When stitching the fabric knitted with facial loops, the needle is inserted from below upwards under the first of these two cross threads at the detail to the right, then under the first of the two threads at the loop of the left part. Then, the needle is inserted under the second thread of the part loop on the right and also under the second thread at the edge tab of the part to the left.

In the case where the yarn is thick, or to the seam from twodifferent hinges fit the needle, it is necessary to insert the needle under the broach between the edge and next loop with it, alternately, then on the right, then on the left. Such a seam turns a little flat and barely noticeable.

Knitting stitch in knitting. Tricks and Secrets

When stitching products it is recommended to useyarn, which is connected with the canvas. In the event that the threads were used fantasy or with a long pile, it is necessary to choose the most suitable option for color. Start the seam better with the remaining end of the thread, even if it is short: this will ensure a smooth and accurate edge of the product. To prevent the thread from attaching parts (additional unnecessary nodules will spoil the whole picture), its length should be 3.5 times larger than the width of the blade on the spoke.

Trying and practicing will help you make the perfect invisible knitted suture in knitting.