Children's crafts: a caterpillar of chestnuts with their own hands, made of paper, plasticine, from balls

Caterpillar - this is a pretty simple hack. The joint creativity of the child and parents will bring great pleasure even under the condition of such a simple task. Simple and accessible materials are used here, with which it is very convenient to work. In this article you will find master classes: a caterpillar from chestnuts with your own hands, from plasticine, from paper, from balls.

Caterpillar from chestnuts

Materials and tools for making crafts:

• chestnuts (in the quantity necessary for your product);
• a box of colored plasticine;
• boxes of ordinary matches;
• Super glue;
• knife, awl.

Caterpillar of chestnuts with their own hands:

1. The largest chestnut, which will be the head, pierce with an awl in places where there will be horns and fastening of the next segment. The rest need to be pierced only to connect with each other.

2. Matches split in two, sharpen with a knife from two ends.

3. Roll multicolored plasticine balls to decorate the horns, tail, trunk. A caterpillar of chestnuts will please children, who like to create and make crafts.

4. Make the horns out of sharpened matches, on which are put balls of plasticine.

5. For each match-fastening, a colored ball is strung, the edges of matches need to be greased with superglue, connect chestnuts among them, insert matches into the fruit. The tail is decorated with a ball of colored plasticine.

6. The muzzle of a caterpillar should be molded from plasticine or cut from a multi-colored paper. Make eyes, blue or green, and a little red mouth.

7. The artwork "Caterpillar from chestnuts" is ready, it can be planted on a sheet of paper.

Caterpillar-rainbow made of plasticine

Materials and tools for the manufacture of the product:

• a box of colored plasticine;
• toothpicks;
• leaves natural or paper (depending on the season);
• Stack and board for plasticine.

Manufacturing technology:

1. Roll seven plasticine balls of different sizes. The largest is needed for the caterpillar's head, the smallest one is required for the tail. The head is made of yellow plasticine. The second ball is orange and yellow, the third is orange, the fourth is mixed red and orange, the fifth is red, the sixth is purple (or mix blue with red), the seventh is blue. If there is a wide palette of plasticine, then you do not need to mix colors, just pick them up by tone.

2. Connect the balls into one torso and bend.

3. The next step is to make the legs. Black plasticine roll out a thin sausage and divide the stack into twelve equal parts. The resulting sticks round off at the end, attach to the trunk.

4. Roll two small balls of blue or green and flatten them in two pancakes - it will be eyes. The same manipulations to do with two black balls (their size should be two times less) - this will be the pupils. Make out your eyes. Rotik cut out the edge of the stacks.

5. Break the toothpick in two, attach the balls of plasticine to the ends and insert caterpillars into the head - these are horns.

6. Put the rainbow caterpillar on the leaf. Caterpillar of chestnut and plasticine - these are the simplest options.

Paper caterpillar

Required materials, tools:

• Tube from a roll of parchment paper or foil;
• a set of color paper;
• cardboard;
• PVA glue;
• scissors, stapler.

Manufacturing technology:

1. Cut the cardboard tube into several identical rings. Cut rings of colored paper into the size of the rings and cover with cardboard rings.

2. Cut out a long strip of cardboard. Put the colored rings on the strip. The first and last ring with a stapler fastened to the cardboard.

3. Small pieces of colored paper combined with an accordion will serve as legs. They are attached to the rings on the right and left.

4. To make a head, you need to cut off a strip of colored paper. It is also rolled into a ring, with a stapler attached perpendicularly to the first ring of the trunk. A nice face you can draw or cut out parts of your face from paper and paste. Cut out of paper and paste the horns to the head. Of course, the handicraft "Caterpillar from chestnuts" looks more voluminous. But it is not always possible to find this natural material.

Caterpillar of a long ball

Materials for the manufacture of crafts:

• air balloons;
• cotton thread;
• Scotch.

Not very airyThe oblong ball must be twisted at certain intervals and fixed with threads. Decorate the ball with a funny mug. If the caterpillar of chestnuts with their own hands can become an excellent decoration of the festive table, then the insect from the balls should be better attached to the wall.

Caterpillar of round and oval balloons

To implement the next idea, we need to takeseveral round balls. On the balloon, which will serve as the head of the caterpillar, draw a muzzle with any emotion that you like. Then you need to attach the balls to each other with an adhesive tape. The caterpillar will turn out to be very funny and big.

Another way - to weave into a kind of spitseveral balls of cylindrical shape, secure with adhesive tape. One round ball glued with adhesive tape to the main body. The final stroke is to paint the caterpillar.

Making crafts will serve as an interesting andcognitive activity for children and their parents. A caterpillar made of paper and a caterpillar of chestnuts can turn out to be wonderful. Photos of crafts for inspiration are suggested above.