How to glue a ceiling skirting board - tips and tricks

Modern renovation of the apartment is impossibleimagine without the use of a ceiling skirting. It is used not only when it is supplied complete with ceiling slabs, but also as a separate decorative element. Ceiling baseboard allows you to give the ceiling a complete look, make it elegant and neat. Self-assembly of the ceiling skirting assumes the possession of some skills that will allow to do it correctly and qualitatively.

First you need to decide on the typeadhesive. Although the question of what to glue the ceiling skirting, in our time should not cause great difficulties. The market of finishing materials can offer a huge assortment of adhesive compositions, which allow to produce a qualitative installation of the plinth. This process does not require special knowledge, it is only necessary to approach this simple work responsibly.

A prerequisite, which must beis performed before gluing the ceiling skirting, is the readiness of the ceiling: it must be plastered. It is also important how the wall covering will be. If painting of walls is supposed, then it is best to make the fillet assembly after staining. When choosing wallpaper as wallpaper for walls, there are two options: you can glue the ceiling skirting to the pasting of walls or after it. In the first case, an exact fit of the edges of the wallpaper in the places where they are adjacent to the skirting board is required. When choosing the second option, you need special care, because you can spoil the wallpaper with glue. At the same time, this option has its advantages, as it allows to hide the defects of the wall abutment to the ceiling. In this case, there is no need to spend time on the exact adjustment of the wallpaper under the lower end of the plinth.

Before gluing the ceiling skirting,it is necessary to prepare the appropriate tools for the work. You will definitely need a knife (it's best to use a painter with a sharp blade), a stool for cutting fillets at an angle of 90 and 45 degrees, an acrylic sealant and a hacksaw with a small tooth (you can use a hacksaw for metal).

Before gluing the ceiling skirting, you needDetermine the angle from which the work will begin. This can be an arbitrary choice, but you can start work from the far corner of the room. The corner design begins with sawing fillets at an angle of 45 degrees. For this we use a chair and a hacksaw. The knife is used in case of necessity of exact adjustment already directly on the ceiling. The glue is applied on two sides: the one that will be adjacent to the wall, and the one that is adjacent to the ceiling.

Before how to glue the ceiling skirting, it is recommendedCheck that the wall is even. If necessary, it can be leveled using a putty. This will allow you to perform the work more qualitatively, because the junction between the fillets at the junctions to the walls and ceiling will be almost invisible. In addition, it is possible to make additional processing of joints between fillets in both straight sections and in corners with fine-grained putty, which is subsequently grinded - carefully, so as not to damage the surface of the plinth.

Acrylic sealant is used at the stage of completionworks. With the help of a pistol, we process the slots that can be formed at the junction points, thus creating a monolithic structure where the walls, ceiling and ceiling skirting will look like a single whole. The use of a sealant makes it possible to impart additional strength to the bonding of the plinth with two adjacent bases.

In the future, you can paint the ceiling skirting in one color scheme with walls or ceiling or in contrast color.