Glue for ceiling skirting: varieties

If you started a repair in the room, the finishby all means ends with the installation of a skirting board. Such work can be done in one of several ways, but the easiest and fastest, as well as effective, is the fastening of the elements to the glue. Such work will be possible even for a person who does not have certain skills, as for the installation of fillets on the adhesive composition there is no need to use additional tools. As the main condition is the correct selection of adhesive composition.

The main types of glue for plinths: polymer blends

If you decide to choose an adhesive for the ceilingplinth, then you should pay attention to one of the most common formulations - the polymer mixture. This glue is developed for each variety of fillets. The most popular brands are "Moment", as well as "Titan". They have excellent astringency, harden for a short time and perfectly hold the material on the surface. With their closer examination, we can distinguish some features. For example, "Eco-nets" and "Titan" have a transparent basis, among their characteristics - increased adhesive capacity. But until the composition does not grasp, the plinth will need to be supported at the surface so that it does not budge. Clay "Moment" grasps instantly, but it is necessary to work with it carefully, the composition should not get on the front surface of the fillets. If you compare the cost, the glue "Moment" will cost the most, among other things, the consumption of this composition is higher than the alternatives.

Liquid Nails

Adhesive for ceiling skirting is presented tosale also in the form of liquid nails, which are able to glue almost any material. Liquid nails can be acrylic or neoprene. The latter variety has a sharp odor and is produced on the basis of organic solvents. The composition can not be called safe for human health, but this is only true until the mixture is completely dry. The main advantage of neopropylene liquid nails before acrylic is that it is possible to work with this glue in rooms with low temperatures and high humidity. Acrylic adhesive for ceiling skirting is completely harmless to human health, the smell of these mixtures, although it is, is rather weak. Minus fear of low temperatures is considered - the base will be completely destroyed in the process of defrosting and freezing. The strength of fastening acrylic liquid nails is lower, since they are made on the basis of organic solvents. Another advantage of neopropylene liquid nails in front of acrylic is that the former differ in a shorter setting time.

Features of putty

Before you glue the ceiling skirting on the wallpaper,you can consider the characteristics of a special putty for mounting fillets. The advantage of this mixture is that the master does not have to hold elements for a long time at the surface, so that the mixture has time to grasp. Among other things, putty has no sharp odor, and therefore, you can work with it in closed rooms. Requirements for surface preparation are not so high, because if necessary irregularities and potholes can be masked with the same filler. The application of the mixture is carried out with a conventional spatula, the composition should be distributed evenly over the surface, and after installing the plinth. If you decide to choose such glue for ceiling skirting, the excess composition can be easily removed if necessary. At the same gap between the wall and the skirting board, you can seal up the putty.

Self-made glue

If desired, putty for installing skirting boardscan be prepared by yourself. To do this, you need water, finishing putty mix, as well as PVA glue. In the clean container you need to add the finishing filler, prepare it according to the instructions, and then add the glue. Gradually, you should pour water, stirring the composition until a thick consistency of sour cream is obtained. Then it is left for 5 minutes and then mixed again. Such glue for ceiling skirting boards made of foam plastic can be used within 2 hours after preparation.

Glue for plinth from foam

If you are wondering about what to glueceiling moldings of foam, it is worth considering the polyvinyl acetate composition, which still includes PVA glues and its analogs. As a part of such mixtures there are no harmful substances, therefore the mixture has no sharp smell. However, it provides a sufficiently long time for drying, so the elements will have to be held after attaching to the surface for 3 minutes. Among other things, polyvinyl acetate glue has one feature, which is expressed in the need to use the composition in large quantities, otherwise the fillets simply can not be held.

Recommendations for installing a ceiling skirting board

Before starting work, it is necessary to implementpreparatory stage. Before cutting and further gluing curbs, you need to calculate their number. Professionals will be able to do without materials, but if you are a novice in this business, it is best to buy one more fillet. When buying a skirting board, you need to consider: the lower the ceiling, the skirting should already be. This is due to the fact that the wide elements will make the room lower. With uneven walls or ceiling, it is recommended to purchase fixers, paint tape, sewing needles, supports, which will help fix the plinth before the glue dries.

Preparation of tool materials

After a good adhesive for ceiling skirting has been acquired, you can take care of additional materials and tools. To carry out the work you will need:

• roulette;
• small spatula;
• stool;
• hacksaw;
• acrylic putty;
• pencil;
• fine-grained skin;
• glue;
• brush;
• paint.

The procedure of gluing

After the acquisition and preparation of all materials andtools, you can make marking and cutting material. You can do this with a hacksaw, cleaning the edges after cutting. At the next stage, you can start applying glue on the back side and the ends, you can do it with a gun. After that, the skirting board is pressed against the surface of walls and ceiling along the planned lines. Using a spatula, you can remove excess glue. This technology is repeated until it is possible to glue the entire perimeter of the room. If you have a question about how to properly glue the ceiling skirting, then the next step you have to fix all the joints with acrylic putty, shading the surface with wet fingers.

Conclusion

Sometimes after gluing the skirting is carried outstaining of its surface. You can start these works only one day after the installation is completed. This procedure is not mandatory, but you can do it if you want to get a better aesthetic effect. To carry out these works, you can use water-based or acrylic paint.