How to lay the tile on the floor: recommendations

The process of laying tiles on the floor may seembut in practice it becomes clear that it is quite easy to perform all operations, especially if you have enough patience. Having done all the work yourself, you will be able to save a lot of money. So, let's look at how to lay the tile on the floor.

Before starting the main process,prepare: measure the width and length of the room to determine the quadrature, and hence the required amount of tile and glue mixture, and purchase all the necessary tools and materials. The list of required materials should be considered in more detail, because without this you can not lay the tile yourself.

Naturally, you will need the ceramic itselftiles or granite. You need to determine the type and size of the tiles, as well as the direction of their placement, and only then can you calculate the required amount. You need to take into account and cutting pieces, because these remnants can come in handy in other places. The second important element is the mortar for styling. It is best to give preference to special moisture resistant glue mixtures, which are usually called simply tile glue. When calculating its quantity, it is necessary to take into account that 4-6 kilograms of dry mixture is spent per square meter of tile. The thickness of the layer should be 3-5 mm. And one more necessary material is grouting for seams. It is better to fill the deformation and angular seams with a silicone grout.

If we talk about how to lay the tile on the floor, then it is worth considering the necessary tools.

You will need:

- Toothed spatula with a tooth height of 6-10 mm;

- mixer and electric drill, with their help you will prepare the adhesive composition;

- a tile cutter, which may well replace the Bulgarian with a diamond circle;

- A rubber hammer that will allow the tile to be properly placed by tapping;

- level or rule, the length of which shouldTo exceed 80 centimeters, it is necessary to control the correct placement of each tile. If the surface needs to be freed from unevenness, a perforator may be useful.

Talking about how to lay the tile on the floor, it is worthnote that you need to do this on a flat surface that has already passed the preparation stage. First you can get the items out of the box, spread out on the floor to check the future drawing. Laying should be planned so that the cut-off parts are near the walls, where they will be almost invisible. If we consider the question of how to lay the tile on the floor, then it is worth paying attention to the arrows that are on it. All of them must be facing in the same direction.

When the direction is selected, it is possible to applysurface the glue with a trowel, and then use a notched trowel to remove excess. The remaining waves are laid tile, after which it must be pressed, tapping with a rubber mallet. When further laying, it is important to monitor the correctness of the direction.

At work it is necessary to clean out immediately from seamsexcess solution, and then install leveling crosses, which will give the same width of the joints. When the solution dries, you can begin to trowel. For this purpose, the seams are freed from dust and excess solution, and then they are treated with a trowel, which is applied with a rubber spatula.

If we talk about how to lay the tile on a wooden floor, then the process is similar, but first you need to make sure that the surface is flat.