For the design of the site is largethe presence of tracks is important. They serve as an excellent decoration of the yard, with their help you can break it into functional areas, and even to move along clean and well-groomed paths is a pleasure.
Before laying the paving slab, you needperform some preparatory work. At the first stage, it is necessary to mark out the places where the tracks will run. To do this, during the laying of the tiles, wooden pegs are driven in, a cord is stretched between them to indicate the boundaries of future tracks. Next, it is necessary to remove the soil (15-20 cm) from the planned sites, and this process directly depends on how to lay the paving slab with your own hands, you decided. If these are garden paths, the soil is removed so as to tilt them away from the house to create the necessary slope for water drainage. Places of laying tiles must be leveled, then proceed to the paving process. How to lay paving tiles with your own hands, depends on the purpose of the tracks and the load they will carry.
Pedestrian paths are usuallysand cushion, the thickness of which should be from 10 to 15 cm. The sand laid into the prepared trench is leveled, then abundantly spilled and tamped. On the edges of the trench, curbs are installed on the cement slurry, the seams between which are filled with mortar. According to the planned drawing, tiles are laid out, between which 2-3 mm gaps are left. The surface is leveled with a rubber hammer and spilled with water to remove excess sand. If the load is assumed to be more solid, then the tile is laid on the base of crushed stone with a dry sandy-cement mixture. The crushed stone is covered with a layer of 15 cm, is leveled and trampled. Curbs are installed on the liquid solution, and on top of the rubble is filled with sand and cement mixture, the thickness of which should be at least 5 cm. The laid tiles are also leveled and spilled with water.
How to lay paving tiles with your own handsat a greater load? It is laid on a cement-sand screed on a concrete base. When laying concrete it is necessary to remember the temperature seams. Borders are installed on the liquid solution, which also seals between the tiles laid.
Variants of how to lay a paving slabwith their own hands, a lot: plait, herringbone, circle. You can do this in a chaotic way. In addition, the laying pattern can be determined by one's own imagination. In addition to the variety of forms, paving slabs are characterized by an abundance of sizes and shades.
How to put a sidewalk tile with your own hands,determined, but it is necessary to know that it requires care. It should be washed, cleaned, but at the same time it is impossible to handle chemicals and stain. Sidewalk tiles have a number of advantages. First of all - environmental friendliness, as it does not contain harmful components. The surface of the tracks always remains dry, and when repairing the coating, individual tiles are easily replaced. This tile can be used many times, and, of course, it looks more aesthetically pleasing than coatings such as asphalt or concrete.
