Wine shelf with own hands: interesting ideas
If you are a healer of European cuisine,then, perhaps, like to pamper yourself with a glass of expensive wine at the table. This drink has gained popularity and does not give the lead. Such a noble product requires a special approach to storage. True connoisseurs collect collections from rare and valuable specimens. If you decide to acquire one, you should get a closer look at how the shelf for wine is made by yourself. The description of the stages of work will be presented below. You can completely construct the constructions of this function yourself.
If the kitchen premise is limited and has littlefree space, you can get a vertical shelf from floor to ceiling. To carry out the work, it will be necessary to do only a few holes in the plywood sheets and fasten them together. This design can be used as a partition to separate space. If you paint the inner surface of the product, the shelf will become a fashionable and stylish interior detail. But you can buy a shelf in the store, but some home-based craftsmen prefer to make such designs themselves. Among other things, you can use materials and tools at work. Thus, the design will cost almost free.
Preparation of tools
If you need a wine shelf, prepare the following tools:
- drilling machine;
- electric jig saw;
- grinding machine;
- pencil;
- roulette;
- building level;
- screwdriver;
- drill;
- circular or hand saw.
Preparation of materials
In the construction shop you can purchase dowels, drill bits, screws, wood pallet, and sandpaper. The latter is needed for surface treatment.
Technology of work
If you are running a wine shelf, then inits base can lie on the old pallet. To do this, using a circular saw it is necessary to cut it, to separate a part of the structure for manufacturing the shelf. Its height should be approximately 50 cm. The next step will be the preparation of boards for the base. With the help of a nail and a hammer, you need to tear off two boards, the main thing is not to break them. Three small bars should be prepared to perform the separation and fixation of the bottom. The bars are sawed by electric or manual jigsaw, and the length of these blanks should be somewhat larger than the width of the pallet boards. They should go slightly beyond the ground.
Carrying out grinding and working with holes
The shelf for wine should look attractive,so the beams and boards should be ground. This will relieve the products from burrs and unevennesses. In this case, you should use sandpaper, the granularity that can vary from 120 to 200. You can also use grinding machines. On one of the boards should be made holes for glasses. Pallets, as a rule, have a width of 100 cm. The holes should be standard, but they can be made in such a way that they exactly match the size of your wine glasses. At standard sizes of utensils it is necessary to plan one aperture, having departed from edge of a board 11,5 see After it it is necessary to mark three more apertures, having departed on 10 see. From an edge of a board there should be a distance in limits from 4 to 4,5 sm on width. Similar marks should be fulfilled on the other hand.
The wine shelf must have holes thatdone with a drill or a drilling machine. From the edge of the drilled holes to the edge of the board, markings should be made, cutting off the unnecessary ones. The received corners are processed by an emery paper.
Assembling
Wine shelves can be made from differentmaterials, but the wood will be the cheapest. If you have used pallets, then after carrying out all the above steps, you need to collect the bottom of the shelf. The length will be placed glasses. The parts of the bottom should be fixed with self-tapping screws, preliminary in these places it is necessary to make holes with a drill. After the bottom is collected, it should be strengthened to the base. At the same stage, everything must be fixed with self-tapping screws, having previously made holes for them. In this case, it is necessary to exclude the possibility of splitting the board, otherwise you will have to look for a replacement.
After assembly, the product should be sandedpaper and cover with stain. As soon as the shelves under the wine will be made, they can be hung on the wall. To do this, use the building level, with which points are marked on the wall. On the obtained marks, it is necessary to make holes with a drill, and then insert dowels in them. The screws are screwed into the latter for a length of 2.5 cm. The hats should not tighten tightly, because the shelf will be removable.
Alternative shelves
Wine shelves can be made by handfor simpler technologies. For example, a wine cabinet can be made from a wooden box. It is installed on steel legs, and in the bottom should be made holes for bottles. Between the rows there is a shelf that will separate the bottles. The simplest solution is a wooden board, which is fixed to the wall horizontally. Run holes in it you can be using a special drill. The main subtlety lies in the fact that holes for the necks need to be drilled at an angle, with the circles should be the same. Wooden lath is cleaned, if desired, painted and treated with lacquer.
You can independently manufactureshelves for wine, the simplest options can be the use of water pipes, or rather, what remains of the repair of the bathroom. With the help of adapters, the pipes are connected to each other in a zigzag construction. To prevent bottles from rolling down the surface, the pipes should be bent at a certain angle.
Conclusion
You can save space by using the wine bar, which will be located under the table. To do this, you can use reinforcing bars, which are bent in the form of hooks.
