Blade stirrer: description, principle of operation, application in everyday life and industry

Paddle-type mixers are actively used inindustrial sphere. The rotor under them is most often selected from a two-phase type. The power of the device is very different. When choosing a modification, it is important to pay attention to the power, as well as the frequency of the mixer.

Many liner models use a small thickness. The level of vibration in such modifications is extremely low. Buy a high-quality blade-type mixer user is able to price from 30 thousand rubles.

Principle of operation of devices

The principle of operation of blade-type mixers is constructedon the rotation of the output shaft. This effect is achieved through the use of motors. As a rule, they are used for 4 kW and operate at a frequency of 44 Hz. Protection systems are available in different classes. To stabilize the shaft there are dowels. Clamps are installed in the upper part of the structures. If we consider closed mixers, then they use covers. Tanks are most often selected in a small size. However, in this case, much depends on the power of the device.

Application in everyday life

In the household mixer of this series can be usedwhen repairing an apartment. Using a closed-type model, the user is able to easily mix cement. Also, modifications are allowed to use as a mixer. In cooking, the devices are also successfully applied. For the preparation of creams they are not bad.

Application of devices in industry

On construction sites, agitators (lobed)occur quite often. Also, the device can be seen at the cosmetic factories. To mix creams they fit well. Powerful modifications are used at oil plants.

Parameters of devices of series SB-146-A

This propeller stirrer has a massadvantages. First of all, experts note a qualitative reducer. The blades used for the modification are quite wide. Some experts are burning that the modification is great for making solutions. At the same time, the permissible overload level is at 5 A. The protection system of the mixer is used in the PK23 series. The shaft at the modification is set to 5.3 cm. The motor for the device is matched with a three-phase type. Anchor is installed with a lining. The agitator speed is controlled by the module.

The level of the maximum vibration in the agitator is equal toonly 5 N. The bearing in this case is not provided by the manufacturer. Some experts say that the modification can be used in the cosmetic field. However, the rotor does not withstand large overloads. It is also worth noting that the mixer is made with a channel modulator. The soft starter option is not available. To buy a mixer of this series, the user is able to at a price of at least 45 thousand rubles.

Features of mixers series SB-148-A

This mixing device is idealfor cosmetology enterprises. If you believe the experts' feedback, the reducer is of high quality. The permissible overload parameter is at the level of 5 N. The protection system PK55 in this case is available. Some experts point to a small shaft. The frequency is at least 2300 rpm. The shape of the blades resembles the petals.

For thick creams the device does not fit the bestway. The thrust bearing is in this case with a blocker. The gearbox is mounted as standard with a gear mechanism. Only one key is used to protect the shaft. Buy this paddle type mixer user can at a price of at least 40 thousand rubles.

Advantages and disadvantages of mixers SB-150-A

The agitator is usedgreat popularity. For domestic needs, it fits perfectly. If you believe the opinion of experts, then the device is allowed to be used in the industrial sphere. The thrust bearing in this case is designed for large overloads. Directly the reducer operates at a voltage of 220 V. The frequency of the device is at the level of 3200 revolutions per minute.

For thick creams the device does not fit. The unique design of the blades allows you to beat the cream. The modulator has a blocking device with a dipole adapter. The limit load parameter is at the level of 5 N. The protection system P40 in this case is not provided by the manufacturer. The operating temperature of this stirrer (blade) is 55 degrees. To mix the oils, the device is used quite often. In this case, the rotor is of a two-contact type and operates at a voltage of 230 watts. The cooling system is used by the KE20 series. The shaft in this case is used at 3.3 cm. If you believe the experts' opinion, the conductivity of the agitator is quite high. In this case, the body is very easy to clean, and in transportation is very simple. Above the shaft is a wide pad that protects the body. Spare parts can be purchased at the service center. The blades of the modification are rather narrow. Buy a model user is able to price from 34 thousand rubles.

Parameters of devices of series СГУ-400

This paddle type mixer is producedwith only one reducer. If you believe the opinions of experts, the shaft is used at 3.4 cm. Also experts say that the device weighs very little. The power of the modification is 5 kW. The energy consumption of the mixer is not more than 60 W. The protection system P40 in this case is absent. Some buyers note a large number of modes for the modification.

The modulator for control is selected by the dipole type. The dowel at this mixer is erased extremely seldom. If we talk about shortcomings, it is important to note that the model is not able to work with oils. In this case, the gearbox can not withstand large overloads. The operating temperature of the modification is 30 degrees. The length of the blade is only 4.5 cm. In conditions of high humidity, the agitator must not be operated. Buy a modification of the user is able to price from 45 thousand rubles.

Features of mixers of СГУ-430 series

These vertical mixers are designed forheavy loads. The container they have is quite voluminous. If you believe the opinions of experts, the overload from the network, this mixer is not afraid. The operating temperature of the vane device is 45 degrees. The rotor manufacturer is installed in a three-contact type, and the expander is used with a condenser. Many experts say that the modification is in demand at construction sites for mixing solutions.

However, it is important to note that the productivity ofit is not very high. The angle of the blades is 35 degrees. A special key is used to protect the equipment shaft. The shaft in this case is used at 3.4 cm. It is also worth noting that the modification has a protective cover. In this case, the rotor box is provided without protection. Spare parts for it can be bought at a service center. The lock is used as standard with an adapter. This mixer starts very smoothly, but stops quickly. Buy it on the market can be only 55 thousand rubles.

Advantages and disadvantages of mixers SDU-440

This paddle-type mixer has a massadvantages. Experts say that the device is able to work with oils of high viscosity. For perfume, the model fits perfectly. The rotor of the modification is used with a dipole adapter. Also worth noting that the model is not afraid of overload.

The blades in the device are installed at an angle of 35degrees. In the construction sector, the model is in demand. Many experts point to good conductivity. The lock in the device is installed with one expander. If you believe the experts' feedback, the protection system copes well with impulse noise. For kneading creams, the modification sounds wonderful. The cover is standardized with a protective layer against corrosion. The modulator for controlling the stirrer is of the condenser type. In total, the model has five modes of operation.

The energy consumption parameter is at the80 watts. The P30 protection system is not available. Blades break quite rare. However, the filter wears out often, and it costs a lot. To buy a modification of this series in a specialized store, the user is capable for 38 thousand rubles.

Parameters of devices of series VMSh-125

The paddle stirrer has only one shaft. To repair and prepare the solution, the device fits perfectly. However, it is important to note that the rotor of the modification is of a through-type type and the allowable overload parameter is located at 40 A. The P30 protection system is absent in the model.

The display unit of the mixer is. For the preparation of liquid mixtures the device is not bad. The extender for the device is selected by the dipole type. The motor, in turn, is used in a three-phase type. The adapter at the modification is of the end type. There are holes for cooling the device. Buy a device the user is capable of at least 44 thousand rubles.

Features of mixers of the series VMSH-126

This paddle stirrer is used formixing of oils of different density. If you believe the opinion of experts, the rotor is available with a high-quality blocker. The contactors at it work without failures. It is also worth noting that the device is in demand in the construction sector. In the repair, the modification can be very useful. Buyers argue that the agitator speed is easy to adjust. In this case, the modulator is of the analog type. It runs very smoothly.

The P50 protection system is not available for modification. The maximum temperature of the mixer is 45 degrees. The shaft in this case is used at 3.4 cm. In total, the model has two capacitors. The cooling system is used in the KE30 class. The filtering unit for the modification, unfortunately, is missing. Many experts say that the model weighs little, and the rack is capable of withstanding heavy loads. Among the minuses, we can note a high energy consumption. The price for this paddle type mixer starts from 44 thousand rubles.

Advantages and disadvantages of mixers VMSh-130

This paddle mixer is produced with twocapacitors. Directly the motor is used on 4.4 kW, and its power consumption is equal to 50 W. The P40 protection system is not available for modification. If you believe the reviews of experts and buyers, then the device copes with oils without problems. This cools the motor very quickly. Blades in the device are at an angle of 45 degrees.

Large overloads from the network model is not afraid. In the construction industry, this paddle-type mixer is very much in demand. The blocking device has a dipole type. The shaft is designed to be overloaded at 3.2 N. It is stalled during operation infrequently. The price for this paddle type mixer starts from 38 thousand rubles.

Device parameters of the RX-850-V series

This paddle mixer is produced withcontact rotor. If you believe the experts, the conductivity is rather high. To mix the oils the device is not bad. Protection system P30 modification is not supported. The blades of the model are at an angle of 30 degrees. It is also worth noting that the model stands out in compact dimensions. The gear unit in the device is normally used with a contactor. This paddle type mixer is very smoothly started. The cooling system is provided by the manufacturer K20 series. The expander in the modification has a channel type.

The modulator uses only one. Only the modification supports only three modes of operation. With network overloads, the agitator of this series copes quite well. The maximum working temperature of the model is 45 degrees. For kneading creams the device is not the best way. The shaft in this case is installed in a diameter of 3.3 cm. The protective key is made of rubber. This propeller stirrer costs about 45 thousand rubles.