Building a Prefab House with Your Hands

In America and Europe today on technologyframe house-building build about seventy percent of individual houses. Today, Canadian technology, also called frame construction, is the most in demand for low-rise construction.

All elements of the frame house are madeindustrial way. Special beams are sewn together in a single monolithic construction and are the backbone of the house. For thermal insulation, modern insulating materials made of natural raw materials are used.

In our country the construction of private housesis continuously improving, especially the construction of a frame house with its own hands becomes popular, although many continue to build houses in the old-fashioned way, in traditional ways - from brick, wood or foam blocks. Frame houses in their characteristics in no way inferior to brick houses, and sometimes even surpass them.

All who decided to build their own skeletonhouse, they know that such houses are called differently - frame-assembled, frame-panel, frame-shield, Canadian and even Scandinavian. The frame construction with our own hands at us is only gaining momentum.

The basis of the house, as it can be understood from the veryname, is a frame for the production of which we use planed sawn timber, but not only them, but also glued timber, especially for the construction of large spans. If you want to build your own home frame house as a heater for walls it is better to use natural, environmentally friendly materials, for example, Izover or Rukvul. The thickness of the insulation must be at least twelve centimeters, so that in winter the walls do not freeze. And that they are not blown, they need to enclose fiberboard or chipboard. Well, the finish of the facade can be done by anyone and depends on your desire.

Building a frame house with your own handscan be broken down into stages. It begins, as well as the construction of any other house, from the foundation. You can make a monolithic foundation, but thanks to the low weight of the house you can use a tape or columnar foundation. The holes for the columnar foundation should be drilled with a suitable diameter drill. Drilling is necessary to a depth of about a meter with a step of 90 cm. In the holes are inserted asbestos-cement pipes, into which a funnel is poured concrete solution. The column foundation can be done literally over the weekend and begin immediately to build the frame of the house, without waiting until the foundation has hardened.

The material from which the frame is made,it is processed by fire protection. The walls are insulated from the inside, then they are finished with an oriented-particle or cement-chip board. You can use other materials for this purpose: billet, gypsum board or laminated plywood.

After completing the interior finish, begin to finish the facade. This can be done with the help of bricks, siding, facade plaster or tiles, artificial wild stone.

Self-construction by own handsdue to the fact that all the necessary materials are available for sale. For the roof, you can use profiled sheets, soft roofs, tiles, Euroshow and other materials. Overlapping, floors, partitions between rooms are made from frame plates. These special slabs with insulation are protected well both from wind and noise. The construction of a frame house with its own hands is much cheaper than a brick house, and it will take two months to build it.

Building a frame house with your own handsmust be carried out in compliance with such an important detail of wireframe technology, such as an air or ventilation gap between wind and waterproofing and exterior finishing, which will significantly increase the operation of the house.