How to make a fountain of stones with your own hands

You can do at your dacha or homesteadplot a beautiful fountain that will delight you with its presence, performing a variety of functions. It can be made of stones, which will ensure not only decorativeness, but also the simplicity of its creation. So, when answering the question about how to make a fountain with your own hands, you should consider all the stages of the work.

The whole construction consists of the following parts: water circulating with a pump that provides all the work; beautiful sculpture, which will be washed by water. As the last element can serve any object that will not break down and deteriorate under the influence of water. If we talk about how to make a fountain with our own hands, it is important to note that the system will look the same regardless of what materials you will use.

Work should begin with a buried in the groundreservoir for water, he will feed the fountain. It is laid mesh, which serves as a protection and a filter against foreign objects, and even higher is the base of the fountain, which will also serve as a support so that the whole structure does not fall into the tank. Submersible pump performs the function of the heart of the fountain. It must be placed in the water in the tank, so that it pumps water for the fountain. Since its power supply provides an electrical network, it is necessary to provide access to it. In addition, the fountain in the country house, built by its own hands, should be able to be serviced. This requires making a base of this size so that it is possible to remove the pump if necessary.

If we continue to understand how to make ourhands fountain, it should be noted that the tank from above can be masked with mulch or stones. A pipe that supplies water to the top must have a valve that will regulate the water flow of the fountain.

The pit for the tank must be 5 centimetersDeeper than its height. In addition, it is necessary to dig a groove to the electrical network for the cord. The bottom of the pit will need to pour 5 centimeters of rubble, and then install the tank. In the groove, it is necessary to lay a plastic pipe so that the wire is securely protected. The power cord should be pulled through the pipe, and then insulated its ends. The pipe with the cord should be placed in the groove, and then fall asleep.

Talking about how to make a fountain, you can go tothe next stage of work. The submersible pump must be installed in the middle of the tank. On top of it, you need to place a grid, which should have cutouts for the cord and fountain. Now you can cut a 10-centimeter metal-plastic or copper pipe to fix it to the pump. To the second end of the pipe, the ball valve should be fixed. At the top of the crane should be a piece of pipe - a little larger, to form the fountain itself.

Stones should be folded as you like,then drill a hole for the fountain pipe in them. Then the stones must be planted on the pipe. The tank can be filled with water, which should cover the top of the pump by 10-12 centimeters. Open the ball valve, and then turn the pump on the mains, it only remains to adjust the flow strength. This is all about the question of how to make a fountain with your own hands.