We repair the roof of a private house with our own hands

Repair of the roof of a private house is done in many ways, everything depends on the type of material.

Repair of a coating of cement-sand and ceramic tiles

Cracks formed on the tiles lead toleaking natural shingles. Such a defect directly depends on the sudden temperature fluctuations and on the crumbling of cement, which is laid between the particles. In order to prevent the occurrence of cracks, you need to reinforce the roof. This is done by installing boards under the base of the connecting rafters. The distance between them is affected by the roof scheme of the house. To solve the problem with cement, remove the old putty and replace it with fresh mortar. It is created from a piece of lime and two pieces of sand. Microcracks formed on the tiles can also be lubricated with the resulting mixture.

Roof repair from metal roofing

Repair of the roof of a private house for such a coveringIt is required if it was installed with an error. In addition, the breakdown can occur during the cleaning of the elements, with mechanical damage or the unfolding of fasteners. In order to protect the metal from corrosion, it is necessary to coat the material with paint if scratches are found on it. Repair of such a coating should be carried out by sealing the gap between the roof elements and the metal, using adhesive tapes or a special silicone roofing sealant. If the problem lies in the poor quality of the screws, they are best replaced with new ones.

Repair of sheet metal roofing

When the roof of a private house is madewith the help of galvanized iron, there are often violations of the integrity of the seam - the seams, which are designed to join the cover sheets. They disconnect due to corrosion or mechanical damage, after which leakage occurs.

In order to repair the roof of a privateat home, you must first clean the damaged sheets with a metal brush. From this material, a patch with a size much larger than the defect area should be cut out. Then it is covered with a special flux and soldered to the surface. After cooling, solder residues should be removed using a file and covered with a paint. If the damage was more voluminous, you need to change all the damaged sheets to new ones.

Repair of the roof with slate coating

Fixing problems in a similar roofingmaterial is not particularly difficult, but it is necessary to perform this procedure with utmost care due to the fragility of the slate. Best of all, by repairing the roof of a private house, use a ladder-ladder, thanks to which the weight of a person on the surface is distributed evenly. The procedure consists of sealing small cracks. For this, repair adhesive tapes and cement mortar are used. The damaged area is wiped with a cloth dampened in gasoline, and the protective paper is removed from the tape and fastened to the crack. Then the surface can be painted.
</ strong </ p>