The main function of the oven for a bath with a water tank
At all times, great demand among the populationused the bath. An important device of such a room is a stove for a bath with a water tank. Today in the steam rooms are installed various heating facilities of this type: electric, wood, gas. However, specialists give their preference to wood stoves.
The main moments of the construction of a stove for a bath with a water tank
It should be noted that modern furnaces forBaths are presented in the form of constructions from stainless metal. In this case, you should take care in advance that soon this unit is to be repaired. In the case of the installation of the stove on firewood, there should be a place for storing firewood.
Another important aspect for a sauna oven withA water tank is a calculation of its capacity. This indicator is calculated taking into account some factors: the furnace mode, efficiency, design of the furnace itself. In any case, the main parameters are the type of wood used as a heating material, as well as the area of the bath.
Woodburning stoves for a bath with a water tank
Back in the distant ancient centuries, Rus built baths withwood stoves. These units are also called stoves. This name is due to the fact that in those old days the baths were drowned in black. Then the focus for heating the steam room was formed due to the arch of boulders. To form a steam, hot water poured hot stones.
Modern baths have preserved all the most important features of the Russian ancient bath, namely:
- The presence of a heater.
- Presence of steam room.
- Application of a broom.
Furnaces for a bath with a water tank are alsoan important feature of the steam room. If before, as a stove used a hearth of boulders, it is now customary to build them out of bricks or install a metal unit of a similar action. In the latter case, it is better to install a furnace made of stainless metal.
These furnaces are heated in various ways:
- With firewood.
- With the help of electricity.
The most advanced option is heatingFurnaces for a bath with a water tank by electric current. In this case, you do not need to pre-stock the wood. It will not be necessary to monitor the cleanliness around the heating unit.
But, despite this, many people give their preference to wood-burning stoves. This is due to the fact that such heating systems create a special comfort and comfort in the bath.
Furnace construction on wood
As you know, wood stoves for a bath with a water tank have a fairly simple and at the same time reliable construction:
- below there is a furnace with an ashtower;
- Further there is a compartment filled with the selected specially chosen gyps of the necessary rock, which are resistant to cracks;
- at the top there is a water heating tank and a samovar tap;
- from the bottom up there is a chimney.
If we talk about modern furnaces, then these units are equipped with:
- furnace of chrome heat-resistant steel;
- high-speed built-in steam generator;
- built-in water tank for 33 l;
- fuel short channel;
- casing-convector of combined type;
- built-in heat exchanger register;
- casing-convector, made of mirror stainless steel.
In such they, the furnace for a bath with a tank for water.
