Hydraulic separator and its role

The hydraulic separator isThe device, the main purpose of which is the separation of the heating and boiler circuits. This, in turn, allows you to smooth the pressure drops and the flow of the thermal carrier, and also respond quickly to temperature changes. Most often it is used in systems that are characterized by medium or large capacity. Hydraulic separator for boilers with multiple circuits allows eliminating the need to balance the system flow of pumps, because all the elements function independently of each other. Among other things, it is necessary to note one more very important role. In this case we are talking about the protection of the boiler itself from the action of reverse water with a very low temperature (the so-called "low-temperature corrosion").

Principle of functioning

If we talk about such a concept as the principlework, then it is quite simple. The entire heating system consists of a large and small circuit. In the case when the required volume of coolant is produced in the boiler with a suitable temperature, the liquid filling the hydraulic separator starts to move horizontally in it. As soon as the balance in the system is disturbed (for example, the faucet turns off in any of the consumers), it will start moving along a small contour, and the temperature in front of the boiler itself will rise. Automation in response will disconnect the device for security reasons. The heat carrier will move in the normal mode until its temperature drops. Cold liquid will be a signal for the system about the need to turn on the boiler again.

Modes of operation

Hydraulic separator canoperate in three main modes. The first of them is activated in the case when the heat demand of the system corresponds to that quantity that has already been produced. Under the second mode, the heating system needs less heat than has already been produced. In this case, a certain fraction of the liquid returns to the boiler through the hydraulic separator and signals the automation of a decrease in its power or in general about a temporary shutdown. The third mode of operation is that the system needs more heat. If this happens, part of the heat carrier flow takes the pumps, and then the automation receives a signal to increase the boiler's power.

Main advantages of using the device

As the studies show,The use of a hydraulic separator allows to increase the term of operation of the boiler by about thirty percent. First of all, this is achieved by ensuring its protection against low-temperature corrosion. In addition, the service life of the pump also increases. An important advantage is the increase in the reaction of the boiler automation to all possible conditions changes. One can not but emphasize the fact that the device helps to avoid imbalance, because the heating system becomes more stable hydraulically.

conclusions

In summary, it should be noted thatThe hydraulic separator functions automatically. In other words, there is no need for its adjustment and adjustment. The boiler is switched on in the conditions of a closed loop flow, thereby providing protection from the reduced temperature of the return water. As for the cost of such a device as a hydraulic separator, the price for the cheapest model is about three thousand rubles.