Installation of diamond drilling: precise holes in any materials

The installation of diamond drilling refers toequipment and tools, in the manufacture of which, the most solid mineral is used. The diamond can be of both natural and artificial origin. In industry, the mineral, as a rule, is used in the form of powders applied to the cutting surface. Provides diamond drilling equipment that has a relatively higher price relative to alternative means used to create holes in concrete, stone, foam concrete and other building materials. But the value of the tool of production should not become a determining factor. The installation of diamond drilling has a number of undeniable advantages.

First, to work with this equipmentminimal effort is required. This is due to the fact that the tool is very sharp. This property of the tool also makes it possible to reduce the heating at the cutting site in comparison with the rest of the drills. Secondly, the installation of diamond drilling guarantees the obtaining of almost ideal holes in a short period of time. The quality of the surface treatment can additionally be enhanced by combining the cutting action of the mineral with grinding using electric current or ultrasound.

Installation of diamond drilling minimizesdynamic loads on the material being processed. With this method of producing holes, the noise and vibration levels are significantly lower than with conventional tools. All this ensures the safety of building structures and reduces their damage during processing. A wide range of diameters of crowns used in drilling makes it possible to obtain holes of up to 500 mm in one operation. This is a significant advantage in terms of performance. As a rule, after using this tool, no additional processing methods are required. The installation of diamond drilling is the optimal equipment if it is required to make holes in a non-uniform material, for example, reinforced concrete.

There are two ways to work with a diamondtool: dry and wet. Drilling technology in the second way requires cooling the cutting plane with water, which, together with the dust, is removed with a special suction. In this regard, the production of work with a drill, perhaps only if there is power and water supply. The hardness (softness) of the bond of the diamond layer influences the service life and performance of the crowns, the softer it is, the faster the tool wears out.

Among the main types of work, where it is effectiveuse of this equipment, you can name the device holes for: the installation of air conditioning, ventilation elements (vent, openings in walls and partitions), laying electrical cable, laying pipes, water supply and sewerage, communication lines, heating systems, etc. The main criteria that should guide when choosing this method of obtaining holes are time, quality and cost.