/ / LED phase indicator: diagram and model overview. How to make the phase indicator yourself

LED phase indicator: diagram and model overview. How to make the phase indicator yourself

When installing the outlet or switch in the apartmentIt is necessary to have a phase indicator at hand. These devices differ from each other in the power of the generator. Also, the models have their own frequency and threshold resistance. A lot of phase indicators are presented on the market.

They are produced with two or three clamps. The pulse width of the models does not exceed 90%. When choosing a modification, it is important to pay attention to the protection class. In order to learn more about phase indicators, it is necessary to consider the scheme of the device.

phase indicator circuit

Phase indicator: circuit

The scheme of the phase indicator includeswire generator. To determine the voltage there is a damper. Sensors in devices are installed with different reducibility. For some elements, the LED is used with an amplifier. If we consider modifications with a display, then they have a microcontroller. To protect the device from overloads, capacitors of operational or impulse type are used.

LED phase indicator

Homemade modification

If necessary, the LED phase indicatorcan do by yourself. First of all, a qualitative wire generator is selected for this. The output voltage should be at least 12 V. It will also require a damper to assemble the device. There are different types on the market, and they are quite different in sensitivity. If we consider a simple model, then it is more expedient to select an element with a resistor. The microcontroller for the phase indicator will need multi-channel type. At the end of the work, the LED is fixed, as well as the clamps.

Customer feedback on Extech DV25

These phase indicators are produced with threeclamps. In this case, the measurement accuracy is very high. The generator in the device is a wired type. The maximum overload parameter is 3.3 A. The sensor has only one installed. If you believe the experts, then he is not afraid of high humidity. To protect the device from voltage fluctuations, capacitors are installed.

For household use, the model is suitableideally. However, it is important to note that the conductors are of short length. To determine the phase in the power shield, the model does not fit uniquely. According to experts, the battery is used for low power, and it only lasts for three hours. Buy the presented phase indicator on the market can be priced from 6500 rubles.

Opinion about Extech DV30 devices

The indicated phase indicator (light) is very simplein use. In total, he has three clamps. In this case, the generator is set to 3 A. If you believe the experts, the capacitors are of high quality. In total, the model has two sensors. Thus, the phase detection rate is very high. The permissible humidity level is only 33%.

The capacitor in the device is installed capacitivetype The operating frequency of the phase sensor is 500 Hz. In turn, the threshold resistance is 20 ohms. The model is not suitable for working with power shields. However, when carrying out repairs in the apartment can greatly help. It is also important to note that the model has a calibration function. Buy this phase indicator on the market for 6 thousand rubles.

LED phase indicator

Description of Extech DV45 models

This phase indicator recentlyis in great demand. First of all, experts note its compactness. In this case, the holder is used with a rubber lining. In total, the model has two clamps. The generator in the device is applied to 4 A. The operating frequency of the phase indicator is 550 Hz. According to experts, the model is capable of carrying large current loads.

For professionals, it fits perfectly. The capacitors in the device are of the pulse type. It is also important to mention a high-quality battery. The minimum allowable temperature of the presented phase indicator is -20 degrees. Moisture indicated device is not afraid. You can buy a model in the store for 7200 rubles.

Consumer reviews about the model LUXEON EWR-5000

The specified phase indicator reviews from buyersgets good. For domestic use, the device is ideal. In total, the model has three clamps. The generator is used in its wired type, and the element overload parameter is 3.5 A. Capacitors are used to protect the device using an operational type. In total, the model has two sensors. The threshold sensitivity parameter is 5 mV. The working frequency of the modification does not exceed 560 Hz.

Minimum allowed phase temperatureThe sensor is at -20 degrees. If you believe the experts, the LED in the device burns out rarely. Also, the advantages of the model include high battery capacity. In standalone mode, it is able to work more than 10 hours. The price of the presented phase sensor varies around 6500 rubles.

phase rotation indicator

Opinion about devices LUXEON EWR-5010

This phase rotation indicator is sold for twoclamping. It has an automatic calibration function. It is also important to attribute the compactness to the advantages of the device. The holder of the model is used with a protection system. Capacitors are installed pulse type. In total, the model has two sensors. Thus, the phase detection rate is very high.

It is also important to mention their sensitivity. The specified parameter is at least 5.3 mV. The working frequency, in turn, is at 650 Hz. The minimum allowable temperature of the phase indicator is -25 degrees. The clamps in the device are of high quality. Also, experts note the strength of conductors. The microcontroller in this case is missing. Buy this phase indicator in our time can be at a price of 7200 rubles.

Description of models LUXEON EWR-5033

This phase indicator has many advantages. First of all, it is important to note that he has very comfortable clips installed. To work with power plants model fits well. The permissible moisture level of the device is 45%. The capacitors of the model are of the pulsed type.

The advantages of the modification includequality sensor. The generator in the phase indicator is used at 3 A. For residential use, the model is also suitable. However, it is important to note that it is quite expensive on the market. On average, the price of the indicator phase fluctuates around 8,300 rubles.

phase indicator

Consumer Reviews on DC Model JJDC0148

This phase indicator is made with two sensors. The clamps of the model are made of high quality. The sensors are equipped with an amplifier, and the phase detection rate is very high. The model has an automatic calibration system. The threshold impedance modification is 45 Ohms. In this case, the minimum allowable temperature of the phase indicator does not exceed -15 degrees.

The battery of the model is used at 120 Ah. The microcontroller in the presented modification is not provided. If you believe the experts, for domestic use phase indicator is suitable. Many experts believe that the device is able to work for many years. Problems with the LED he rarely occur. You can buy this model in a specialized store for 6400 rubles.

Opinion about DC devices JJDC0110

Indicated phase indicator on LEDmade with two clips. Sensors in the model are used at 5 mV. If you believe the experts, then the barrels last for a long time. Directly capacitors are applied pulse type. The microcontroller of the model is missing. According to experts, the device is suitable for working with power equipment. The working frequency of this modification is 340 Hz. The permissible moisture level is 55%.

phase indicator

The vibration signal function of the model is not provided. The minimum allowable temperature of the phase indicator is at -25 degrees. The amplifier in the presented device is missing. This model weighs only 0.3 kg, and is quite compact. You can buy an indicator of the phases of this series for 5700 rubles.

Description of DC models JJDC0112

This phase indicator is produced with threeclamps. In total, the model uses two sensors. Phase detection speed - 3 seconds. There is no auto calibration function. According to experts, the model is not suitable for working with power equipment. The generator in it is applied to 3.5 A. The parameter of the current overload in the device is insignificant. The permissible humidity level fluctuates around 56%. Capacitors to protect the system are applied operational type. You can buy the specified phase indicator on the market for 6300 rubles.

Read more: