Replacement of glass on "Ajpad 2": features of work

Apple products are known for qualityassembly and excellent operation of devices. But for various reasons, the equipment may require repair. Often this is due to a sloppy attitude of a person. Replacing the glass on the "Aipad 2" is required due to its damage or due to other factors. This is described in the article.

Causes of broken glass

The display usually crashes with the device falling. In addition to mechanical impact, glass bursts for the following reasons:

1. Factory defects. Prolonged use of the device leads to an increase in temperature. If the display is poor-quality and there is air in it, then it bursts with heating.
2. Use in repair of Chinese components. Cheap spare parts are different from the originals, so due to various factors they quickly deteriorate.
3. Battery bloating. Deformations of the battery lead to an increase in pressure on the glass, because of what it bursts.
4. Deformation of the hull. Even if the device remained in good condition with a fall, the deterioration of the glass state occurs later. The display may break due to a malfunction of the housing.

When do I need to change the screen?

Replacing the glass on the "Aipad 2" is not only due to the fact that it crashed, but also some problems with the touchscreen:

1. No response to pressing.
2. Incorrect touch processing.
3. Part of the touchscreen does not work.
4. There are cracks.

With such problems, the repair of the device is mandatory. After professional replacement of the display, "Aypad 2" will again work properly.

Diagnostics

Before replacing the glass with"Aipad 2", diagnostics is necessary. The procedure allows you to determine what is broken, and also because of what it happened. Moreover, there are not always external signs of a malfunction.

Often the display module breaks the touchscreen module andmatrix of the screen. Then it is necessary not only to replace the screen of "Aypad 2". In modern versions, you usually need to change the entire screen module. Do not conduct diagnostics yourself, it is better to entrust this work to professionals.

Difficulties of repair

The replacement of glass is considered a complex procedure, for which skills and abilities are needed. During repair, the following problems may occur:

1. Torn lines. This is due to the incorrect removal of broken glass, especially when this work is performed by the users themselves.
2. Unsuitable adhesive. Glass should not be attached to super-glue, as it will be broken even with minor bumps. And the workshops use double-sided scotch tape.
3. Cleaning the glass. Old glue must be cleaned completely, only then it will turn out qualitatively to install a new screen.

On the case of the device can be crumpled corners. Because of additional defects, the master's work becomes more complicated, and therefore the cost of repair will be more expensive.

Why do I need to contact the service center?

Repair "Aypad" should be done by the master. He will check that no mistakes are made during the work. When working inside the device should not get dirt, dust. Otherwise, you must again perform cleaning, disassembly of the tablet. When ordering a job from a professional, the person gets the following benefits:

1. Quality service.
2. Use of original spare parts.
3. Work on professional technology.
4. Short repair period.
5. Guarantee.

The device "Aypad 2" is designed so that the repairis easier than for other equipment. But in the tablet a lot of screws, so for disassembly and assembly you need to have experience and knowledge, a special tool, equipment. All this can be provided only in the professional center.

Cost

Masters start repairing "Aypad" with diagnostics. After this procedure it will be possible to fix the price, because everything depends on the complexity of the work. How much does it cost to replace the glass on the "Aipad 2"? The minimum price is 1500-2500 rubles. It also depends on the speed of work. If it is necessary to correct other defects, the price increases.

The repair time is usually 30-60minutes. When replacing the old glass is removed, the case is cleaned of glue, glass, and then the body is repaired. Then, with a constant air flow, a new display is installed. A special double-sided adhesive tape is used for fixing. If everything is done correctly, the new screen will be fixed perfectly.

How to increase the life of the glass?

What you need to do to make the touch glass worklong. Although the device has a scratch-resistant display, it can still crack, crash. To extend the lifespan of "Aypad 2", it is necessary to treat it carefully, that is, to protect from falls, and not to allow excessive loads. Devices are worn in briefcases, in cases.

It is important to use a protective film thatshields the screen from many unfavorable factors. Thanks to it the display will not spoil from dirt, scratches. Some films have an anti-glare effect, thanks to which the tablet can be used under sunlight.

Often the screen spoils from falling to an angle. In the "Aipad 2" the case is made of soft aluminum, so the blow leads to a uniform breakdown of the entire area. To minimize the negative consequences, you need to use covers that cover the case. The device must be protected from falling into water, as the liquid leads to failure of many systems.

Thus, the repair of the screen on the "Aipad 2" is betterperform in a professional workshop, otherwise independent activity can worsen the work of technology. And then still have to pay for the restoration of the device in a specialized center.