Spinning Black Hole Bassmania: rating, reviews

Black Hole specializes inproduction of high-quality spinnings. Models of different lengths are produced, and the characteristics are quite different. On average, the maximum tensile load is 5 N. Blanks in devices are made most often from Kevlar. Also on the market are modifications with titanium holders.

The legs are applied both single and doubletype. Coil holders are manufactured in various strengths. In this case, much depends on the value of the goods. Models with closed holders are rare. The fasteners of the coils are mostly wooden. The indicator of water resistance is quite high. Balzer and Cormoran (spinning firms) are direct competitors of Black Hole.

Feedback on the spinning Mania S-602ML

This spinning Black Hole Bassmania reviews inmostly receives a positive nature. If you believe the customers, the form is of high quality. The total spinning length is 2.3 meters. For catching dallia or pike, the model fits perfectly. The permissible weight of the tooling is 55 g. The holder itself is made of graphite. The attachment at the coil is rather weak. For bream fishing model is not the best way. Directly the desk at the blank is made of fiberglass. Its diameter at the base is 1.2 cm. For catching white-eyes, the model is used quite often. It is worth the spinning in the area of ​​3400 rubles.

The opinions of models Mania S-603ML

Overview of the Spinning Mania S-603ML is more appropriatestart by listing the dignity. First of all, buyers note a strong form. In this case, the length of the model is 1.7 meters. The spinning test is at 2 oz. If you believe the feedback of customers, then problems with the rings are rare. For the rigging on 55 g the model fits perfectly. The fastening at the coil is made entirely of titanium. If we talk about the disadvantages, it is important to note the weak holder.

For the purpose of catching a cane or a dally, the model fitsgreat. Rings are made of silicone. The spinning of the indicated series is classified as heavy. The indicator of the maximum breaking load in it is 4 N. With vibration damping the model is all wonderful. For catching a puff and a pike, spinning fits perfectly. It is also important to note that he has a good reel seat. It is worth in the shops this spinning Black Hole Bassmania (market price) about 4500 rubles.

Description of the models Mania S-605ML

An overview of this spinning should begin withenumeration of parameters. The total length is 2.2 meters. The spinning test is only 2.3 ounces. The permissible weight of the rigging is not more than 120 g. The indicator of the maximum breaking load of the line is 2 libras. The blank in this case is made entirely of aluminum. The reel seat is highly durable.

The rack is quite wide, and withwith stabilization everything is fine. The spinning coil in this series is of inertial type. In turn, the clamp is used open. If you believe the reviews of buyers, then for catching dallia or bream the model fits perfectly. The resistance to transverse loads in the blank is not very high. The spinning rings of this series are completely reinforced.

The coil of the model is on a strong holder. The clamping nut is missing in this case. For the purpose of catching synza or barbel, the model is used quite often. It is especially important to note that spinning has an ultrafast system. Epoxy resin is not used in the production of blank. There is a model of this series in the vicinity of 5400 rubles.

Feedback on the spinnings Mania S-612ML

This is a quality and inexpensive spinning Black Hole. Buyers praise him for a strong holder. The total length of the model is 2.2 meters. The modification test is at 3.2 kg. If you believe the reviews of buyers, then problems with the coil are rare. The structure in this case is of the ultrafast type. The model is made with a Kevlar coating. The bend of the whip in spinning is small. Directly the rings are made of aluminum. The legs are of double type.

At the coil, the handle is provided by the manufacturerfairly compact. For the purpose of catching white-eyes and bream, the model fits perfectly. Attachments at the coil are provided with a closed holder. Directly the rack is treated with epoxy resin. The vibration damping index is very high. It is also important to mention the quality of the clamping nut. The latch is made of lead. It is worth spinning the Black Hole Bassmania presented series in the area of ​​4700 rubles.

Opinion about the Opirus S-623ML

Spinning Black Hole Opirus S-623ML is wonderfulsuitable for fishing from a boat. The total length of the modification is 2.4 meters. The test of the model is equal to as much as 3.3 ounces. Gear in this case you can apply a different weight. If you believe the feedback of buyers, then the form of the model is installed pretty durable. However, it is important to note that the holder is made of ordinary wood.

The maximum line load is4 kg. In order to catch the white-eyed, the model does not fit well. The curve of the whip is very large. The holder is of a ring type. The tip of the spinning bends well. For the purpose of catching dallia and barbel, the model is used quite often. The handle at the coil does not stand out with great strength. The attachment to the blank is made entirely of titanium. The holder of the model is used with a closed head. The legs are very wide, so the rings rarely fly. For the purpose of catching a gudgeon, the spinning of the specified series fits perfectly.

It is also important to note that the model usesshort stand. Thus, there is no heavy load on the form. The holder holder can withstand a significant weight. The resistance to transverse loads in spinning is quite low. The elasticity index of the blank is 5.5 N. You can buy the model of the presented series at a price of 6200 rubles.

Description of the models Pro S-627ML

Spinning Black Hole Pro S-627ML in the first placeis appreciated because of the quality coil. The total length of the modification is 2.2 meters. The probability of breakage of the blank is extremely low. The spinning test is not more than 3 kg. Tooling in this case you can use different weights. With the aim of catching dallia and crucian carp the model fits perfectly. However, before buying a product, its shortcomings should be considered. First of all, the owners note a short holder.

Maximum breaking load ratingis 2 ligers. The form in this case is made of fiberglass and is very flexible. The bend of the whip at moderate loads is small. The tear resistance of the model is low. The reel seat is made with the addition of Kevlar. If you believe the feedback of buyers, then the model has an excellent ring-type holder. The stand under it is made of titanium.

For the purpose of catching a char or a gudgeon the model is suitablegreat. The handle at the coil is well stabilized. The rings and spinning of the indicated series are of synthetic type. The legs are highly durable. With the aim of catching pike and beluga, the model does not fit well. It is worth in our time, this spinning Black Hole approximately 5500 rubles.

Reviews of Spinning C-622MH

For catching thespinning Black Hole Bassmania. He mostly receives positive feedback. However, it is important to consider the shortcomings of the model The main disadvantage lies in the weak fastening. At the same time the form is pretty good. The total length of the spinning is 2.4 meters. For the purpose of catching blue and white-eyed, the model fits perfectly.

The modification test for this series is 2.3 kg. If you believe the feedback of buyers, then the holder is able to withstand heavy loads. The rack at the modification is applied superfast type. The maximum breaking load of the line is 3 ligers. With vibration damping at the counter, everything is fine.

The electrical conductivity of the model is low. Spinning is classified as ultralight. The form in this case is made entirely of Kevlar. Also the model is treated with epoxy resin. If you believe the reviews of buyers, then the coil is characterized by high strength. There is a model in our time for more than 5 thousand rubles.

The opinion of the models C-640MH

This spinning for jig has a lot of advantages. First of all, the model is praised for flexibility. The total length of the form is 2.2 meters. The spinning test is no more than 2 liters. If you believe the feedback of buyers, the stand of the form is able to withstand a lot of weight. The maximum breaking load is at the 3 kg mark. The reel seat is made entirely of graphite and has a crystalline base. The external surface is very hard.

The stand under the coil has a small width. For the purpose of catching synza and barbel, the model fits perfectly. Holders in this case are of a ring type. The handle at the coil is balanced. The clamping nut on the holder is missing. For the purpose of catching a chill and gudgeon the model is used often. The fixing ring of the spinning is of the reinforced type. The tube at the blank is used with a high degree of impact resistance. Buy spinning this series can be priced from 6200 rubles.

Description of the models C-653MH

Spinning Black Hole Bassmania represented byseries is often used for catching kaluga. If you believe the feedback of buyers, then with the stabilization of the model, everything is fine. Speaking about the characteristics, it is important to note that the total weight is 130 g. The spinning test is no more than 2.2 ounces. The probability of breakage of the holder is extremely low. However, before buying it is necessary to take into account that the form is made completely and graphite. With vibration damping, the model can have serious problems. The reel seat is made of aluminum alloy. The electrical conductivity is high, and this is a big drawback. The holders for the spinning of this series are of the ring type. Fastening is provided for a small width. For the purpose of catching blue and white-eyed, the model fits perfectly.

The bottom retainers are of closed type. If you believe the feedback of buyers, then the clips to the blank fit tightly. The fixing nut is of small diameter. Rings in this case are on single racks. The spinning reel of this series is of the inertial type. With stabilization, everything is fine with her. The impact resistance of the modification is a maximum of 4 N. The handle of the coil is made with a trigger. For the purpose of catching bream and crucian car, the model is not suitable. Buy spinning of the presented series in a specialized store can be priced from 4800 rubles.

Reviews of Spinning C-658MH

This spinning for jig is characterized by the presence ofchrome plated form. The index of electrical conductivity is low. If you believe the reviews of buyers, then this model is great for fishing from a boat. The total length of the modification is 2.3 meters. The spinning test is 3 ounces. Snare is allowed to use a small weight. The maximum load indicator is at a level of 4 kg. The curve of the whip is small in the model.

Directly reel seat is madecompletely from Kevlar. For the purpose of catching a sync, the model fits perfectly. The stand under the blank is made of fiberglass and is characterized by high strength. The transmission rings are provided with a small diameter. The legs are of the same type. The handle of the coil rotates without problems. With stabilization, everything is fine with her.

With the aim of catching the top hat, the model fitsgreat. The clamping nut on the rack is missing. There is a clamping ring at the base of the blank. The persistent protrusion of the holder is not wide. With a view to catching daplia, the model does not fit well. It is also important to note that spinning often breaks the coil holder. There is a model of the presented series in the region of 4700 rubles.

The Galaxy S-662M

For catching sturgeon, spinningBlack Hole Galaxy S-662M. Its total length is 2.1 meters. If you believe the feedback of buyers, the legs of the rings are of high quality. The test of this spinning is not more than 3 ounces. For equipment up to 50 g, the model can be used. The ultimate tensile load is 3.4 kg. The structure in this case is of the ultrafast type. At medium load, the bend of the whip is insignificant.

If you believe the reviews of customers, the rackis capable of withstanding heavy loads. They have a model made entirely of fiberglass. In this case, the coating is made of graphite. The stand for the form is provided with a small diameter. The degree of absorption is insignificant. The holders of the spinning of said series are of a ring type. The reel seat is used with a carbon fiber platform. The resistance to transverse loads at the rack is low.

The elasticity parameter reaches a maximum of 5N. The handle in the presented model is made of Kevlar. The legs under the rings are set to a small thickness. With a view to catching a pike, the model fits perfectly. However, it is important to consider the high cost of the goods. Find in the shops the supplied spinning Black Hole Bassmania can be priced from 5700 rubles.

Reviews about spinning S-630M

The presented spinning Bassmania is wonderfulsuitable for fishing from a boat. The holder is used with a wide stand. If we talk about parameters, it is important to note that the total length of the blank is 2.2 meters. The spinning test is at 2.4 kg. For long-distance casting of the bait, the model fits perfectly. Directly the manufacturer form is made of graphite, which has a crystalline base.

If you believe the feedback of buyers, then themodel is superfast. Holders of the model are of closed type. With the aim of catching beluga, the modification suits remarkably well. The transmission rings are fixed on the qualitative legs. The platform for the coil is made of titanium. If you believe the feedback of buyers, then the degree of energy absorption in spinning is at a high level.

The clamping nut is used with an aluminum clamp. The spread of the modification is smooth. The limit breaking load is 2 ligers. It is also important to note that the model is often used when catching daplia and bream. Buy spinning this series can be priced from 5 thousand rubles.

Description of models S-644M

Spinning of the presented series is made withlong stops. If you believe the feedback of buyers, then the form of the model is able to boast good strength. It is also important to consider the length of the rack. The maximum breaking load is not more than 4.3 kg. The form in this case is made entirely of carbon steel, and the coating has a fiberglass type.

The reel seat is provided in an average width. For the purpose of catching synza or white-eyed, the model fits perfectly. Stiff protrusion of spinning is small. The water resistance index reaches a maximum of 88%. A model in specialized stores costs about 6200 rubles.

Black Hole spinning: top rated models

Given the features of the above models, the rating of the best spinning looks as follows:

1. Galaxy S-662M.

2. S-630M.

3. C-658MH.

4. Opirus S-623ML.

5. S-602ML.