Loop on the hare. How to loop on a hare

Serious hunter will not specifically killhis time and legs, to get a rabbit. Hunting for a rabbit with hinges often accompanies the main fishery. For example, I went to put traps on a sable, at the same time I grabbed a dozen loops. I noticed a suitable place in the birch-tree - I adjusted the loop over the hare path. The carcass of the animal for the Prandy will fit, and the skin will go into credit for the fulfillment of the plan.

Time matters

Put a loop on the hare when the winter is alreadyoverclocked, gained strength. Precipitations were enough, harepaths deep cut through the snow. Do not like these little animals run on virgin land, they make themselves real "sidewalks." Putting hinges on a hare in the winter is, too, you know, art! Do not suicide suckers, so as to voluntarily climb into the noose! An experienced hunter finds a place in which the hare does not dodge fate. For example, where the path passes between two close-lying trees. To get to such a site, too, must be wisely. It is strictly recommended not to step on the trail. The hare will notice and will reproach: did not lay, say, a footpath, so by what right trample? He can even take offense and stop walking here. Will lay aside another path, from sin away!

How to guard the loop correctly?

The loop on the hare with a free end is attached totree trunk, and a ring of wire with a diameter of 15-20 centimeters should be located perpendicular to the movement of the animal and hanging in 10 centimeters above the path. An experienced hunter hides a loop also with bushes, grass blades, which are knocked out next to the snow. The poor fellow is oblique! How many times he squeezed between these very trees, and the grass gently tickled his fur. And then suddenly - again! I grabbed her by the throat and did not let her. The more the hare struggles to escape, the stronger the squeeze of his neck.

Little tricks

The one who will be interested, how to put the hinges onrabbit, should take note of another subtlety. To scythe did not suspect anything, it is necessary to discourage the smell of a man from a snare. Some for this boil a loop in one vessel with a coniferous or birch broom. Perhaps the hare is not as choosy as we here painted it, do not disdain to crush and in a loop unbroken with needles, but it's clearly not worth it to smash the loop ring over the path with smoky fingers.

What wire is the catch hinge made from?

Now tell you how to make a loop on the hare. Popular literature recommends using a nichrome wire with a cross section of 0.7 millimeters for this purpose. It can withstand up to 30 kilograms of weight. Such a loop, believe me, not only the hare, but also the fox will stop! And the hunters told me that the loop on the hare sometimes produced a larger beast than a fox, for example, a lynx. A little more than a meter of wire will go to the hammer. At one end of it is made a small ring with a diameter of five millimeters, the free end of the wire is threaded into it - the loop is ready.

Now you can buy anything you like, inincluding quality material for loops. Previously, did not really think about the wire from which the loop was made. And they did not force the hares to check the new product for durability. If it was not possible to get a good thin steel wire from a familiar beekeeper (a suitable material for the quality is pulled on the frame), old tires from trucks were burned. Or unwound coils from old transformers. Any tucked-up, even a thin copper wire, went into action.

Repetition is the mother of learning

The most important thing to do for a fastcatching a small animal, is to install the loop correctly. Make a knee, curving the wire at the base of the ring so that for the time being the loop on the hare was in standby mode and worked only from contact with its potential victim. With practice comes the understanding of what size the diameter of the ring should be. Notice how the animals come across the loop: if the trunk is too large. Tightened and left - hence, small or not at that level installed. Such a loop the hare will bypass. She will stumble into it, feel something wrong and run!

Nuances

In the loop, the hare must climb with his head, so that shethoroughly dragged around his neck. This animal is yours. And then there are times when the hunter at the site of the installation of the rings finds only a tilled meadow in the circle. This means that, most likely, the loop was large, so the hare got into it by the torso. And since no one was strangling his throat, and he really wanted to live, he ran around until he twisted and cut the wire. To prevent the loop from twisting, you can add it with a kapron rope at the end, and then tie the rope to a tree. It happens, the place will get such that neither the bush near the path does not grow. In such cases, use a "potash", that is, a peg, tearing which, the animal will drag it until until entangled in the thickets. And in the thickets he will necessarily go, because the peg is rustling behind, and the hare begins to become obsessed with the pursuit mania. Out of fear, he hammers into the thickets and there, naturally, becomes entangled. Another use of a pole, which at an angle to the path buried in the snow. A long pole can not carry a hare behind itself, and then the oblique remains in place and surrenders to the mercy of the winner.

Preliminary results

Here we are, in no hurry, in the most detailed mannerhave disassembled, how to put loops on a hare (or on hares). But an experienced hunter will only laugh at our naivety. He will tell you that loops should be placed only on "fresh" paths. That is, before installing the traps, make sure that the scythe does not leave the trail and still uses it, going to feed and back. If there are frosts all week and there is no snow, then it is unlikely that you will distinguish the old track from the new one, and therefore you will not be able to correctly set your hinges. Snowstorm, snowstorm and other similar "delights" of winter also do not contribute to normal hunting. By the way, looking at the loops, it is desirable to walk, it is called, "trace in the trail". In this case, there is a hope that the blizzard will not move your tracks, and you will not step on the hare path. You can re-read a lot of hunting literature, but never try the luncheon, extracted by yourself. It is not for nothing that the classic said that experience is the son of the mistakes of difficult ... As the Marxists maintained, only practice confirms or refutes the theory. Armed with knowledge, it is necessary to experience them in practice, that is, to hunt. Now you know how to catch a hare loop. But all the same, it is desirable to go hunting first time not only to one, but to a company with a more experienced comrade, since there is always something to learn from him.

A living example

There are such aces - do not worry mom! And many, most likely, met such. For example, one person can regularly ride for hares and bring up to three dozen at a time. And another company, although it trades in threesome, the result has an order of magnitude more modest. And this one is one, and on you - full sleds of hares! It turns out that early in the morning he goes skiing and moves along the road, literally a hundred meters from her. It takes about five kilometers to one side and the same number in the opposite direction, approaching the house. And in the jungle does not climb, and the hares are full. And what's the trick? The fact is that hares in the winter closer to human habitation are pressing. Foxes, wolves, sable and lynx are afraid of people.

Yes, there are wise hunters, many things can be invented for effective catching rabbits ... And hares are wise!