How to get into safe mode Windows 10: step by step instructions

Experienced PC users are aware of this option"Windows" as "Safe Mode". It is necessary in modern OS, because the latter are by no means sinless. Errors happen, and correct them in working order sometimes does not come out. With XP and 7 everything was more or less clear. But with version 10 everything became much more complicated. Standard safe mode entry is disabled. Now this is not so easy. What caused this decision of the developers - is unclear. But it is undeniable that the seventh version was much more understandable than the newfangled "ten". However, even in the time of XP, they said so. So, most likely, users will get used to this "miracle." So how do you get into the safe mode of Windows 10? About this they talk.

What is "safe mode"?

Safe mode is a way to boot the systemonly with the most important drivers. That is, only those components that are needed for minimum system availability will be downloaded. No additional codecs, flash and other unnecessary nonsense. This mode is used to fix operating system errors, return to the early state by system recovery. Also, some viruses can only be deleted in this way. Therefore, you need to know how to enter the safe mode of Windows 10, to everyone and everyone.

Sometimes this state of the OS is requiredcorrection of "accounting" or local conversion. Naturally, this procedure requires access to the Internet. And here the "Safe Mode with Networking Drivers" option will help. Users of the "dozens" need to choose this option, because correcting the account without the Internet does not work. And this again brings us back to the question of how to enter the safe mode of Windows 10.

How do I log in if the OS starts?

There are various options for downloading "dozens" in theSafe mode if everything is working fine. The easiest thing is to click on "Shutdown" in the "Start" with the clipped "Shift". Then you will be prompted to choose the type of download. Will only choose the one you need. Also try to "return" the start of the mode when pressing F8. It will only be necessary to write down the desired text in the command line. How do I log into Windows 10 safe mode through the command line? About this just below.

There is another option. Enter the "Options" and then "System Restore". There will be a lot of unnecessary text with the available options. Among other things, there will be the items "Restart the computer in safe mode" and "Restart the computer in safe mode with support for network drivers." Choose the one that is needed at the moment, and reboot the PC or laptop.

You can try to perform another procedure. Go to "Start", select "Run", enter "msconfig" (without the quotes). A dialog will appear in which will be the "Download" tab. Among a fair amount of items there will be "Boot Options" and "Safe Mode" with a bunch of options. Here it should be ticked. And then just restart the PC.

Use the command line

Go to the "Start", select the "Command line"and enter the text in the commander: "bcdedit / set {default} bootmenupolicy legacy" (without quotes). Then restart the machine and press F8. The Windows start options window will appear. Here we choose "Safe Mode". Do you need network drivers - decide for yourself. This is one of the answers to the question about how to enter the safe mode of Windows 10.

Through the commander usually solve a variety ofProblems. But in the "top ten" it is best to use Windows Power Shell - the console, borrowed from the OS of the Linux family. This tool allows you to execute commands on behalf of the administrator and works much faster than the standard commander. And it is more understandable to those who have ever used "Ubuntu" or "Mint". The method with the command line works in any operating system from Microsoft (except XP). The company from Redmond did something adequate. Honor her and praise!

What should I do if the OS does not start?

There is only one way. Run "Windu" in Safe Mode does not work. Therefore, you need a flash drive with a distribution of "tens." When loading the installer, you can crank a feint with a commander and make Windu boot from the HDD in safe mode. It is necessary only in the welcome window of the installer to find the inscription "System Restore". There will appear a commander, into which we introduce the text already familiar to us (without quotes). Now reboot the PC or laptop. This is one of the answers to the question about how to enter the safe mode of Windows 10 via BIOS.

Many believe that if the operating system does notwants to work, the easiest way is to reinstall the OS. On the one hand, this is so - a clean system always works faster. But on the other hand, frequent reinstallations of the operating system are a sure death for the hard drive. Not to mention the fact that a lot of time you need to kill to complete the system setup. This is without regard to the time to install it. Therefore, it is easier to solve all the problems that can be corrected by using a safe mode.

ASUS Notebooks

Here there are some nuances. The fact is that ASUS laptops have a kind of input to the boot menu (the choice of the media at boot). Before you perform actions with the commander in the installer "tens", you must force the laptop to boot from the drive with the distribution kit. To do this, just hold Tab at startup and select the type of boot you want. How to log in through secure mode in Windows 10? ASUS is the same PC. That is, the method with the commander from the installer "tens" also works.

In general, the manufacturers of notebooks "Asus" itsthe concept of convenience and ergonomics. That's why the engineers moved away from the standard canons and assigned some insane keys for low-level control of the laptop. Therefore, before trying to change BIOS settings, you need to carefully read the instructions. Otherwise, your "right and standard" actions can lead to very sad consequences.

Acer Notebooks

The most problematic in this respect is the laptopE5-731. In order to get into the boot menu of this laptop, you need to do a number of operations. To start, you need to press Enter to get into the BIOS of the laptop. Then move to the "Boot priority" tab and select our flash drive with the "dozens" installer. Now we must restart the device. The laptop will boot from the drive, not from the HDD. How to log in through the secure mode of Windows 10 in Acer E5-731? With the help of the commander in the installer. In the same way as in the previous examples.

With "Acer" all somehow it is not clear. This way to get to drives with distributions was used even in the ancient system blocks with AMD processors and BIOS Phoenix. Why manufacturers decided to choose this particular method is unknown. But in this situation you will have to return to the BIOS after the manipulations with the commander and set the priority in the priority from the HDD. And this is quite inconvenient.

Lenovo Notebooks

How to log in through secure mode Windows 10 viaBIOS laptops from Lenovo? Here the easiest. It is enough to press the F12 button when the device starts up and the media selection menu appears. Choose a USB flash drive and boot. And then we act according to the already known scenario with the command line and the necessary command. Laptops from Lenovo are simple in this respect. The Chinese company clearly knows the sense of ergonomics.

In general, laptops "Lenovo" in quality andthe location of the controls is not inferior to the more famous brands. And in the case of Windows 10 and do behave more adequately than other models. There is even an interesting option with Safe Mode for those who use UEFI. It is enough to hold Delete at startup and the startup options will appear. Well, is not it cute?

Conclusion

Sure, go into safe mode in Windows 7was much easier. But in the "top ten" he did not go anywhere. Simply, the developers made it less accessible. But using certain commands or actions to load the operating system in this mode is quite possible. And after that, you can fix driver errors, the operating system itself and its components. The main thing is to do everything according to the instructions. Then there will be no problems.

If none of the above methodshelped to correct system errors, that is, at least two ways. The first is to reinstall the entire OS. This advice is not devoid of common sense, since the fresh "Windows" is always better and faster. If you do not know how to install, or you do not have free time, then the only solution is to carry your laptop or PC to the professionals in the workshop. They will do everything quickly and painlessly. But it will cost money.