How to connect the camera to a computer

Connecting a webcam today can servethe most diverse purposes, depending on the needs and fantasies of the person or the company's management. Speaking of the most common functions of web cameras, it is worth highlighting a few key points:

1) one of the settings allows you to use this device as a motion detector. Its task is to monitor the movement of certain persons in the field of view of the device;

2) no less often the camera connection is usedfor the transmission of audio and video signals over computer networks. This function is necessary in cases when there is a great desire to communicate "live" with friends and acquaintances who are in other cities or countries;

3) in some cases, the need to connectThe camera to the computer is caused by the desire to restrict access. There are a lot of options to implement this function, starting with the usual monitoring of each incoming person and ending with systems that are fully automated.

In addition to the above functions, the webcam canserve and completely different tasks, such as recording video images and then uploading them on the Internet. About how to connect the camera to a computer, we will tell in more detail. So first of all, you need to install the device in the right place for you. To do this, usually use a monitor or a section below it. This will make it possible during online communication not to turn your head towards the camera. Next, find the USB connector in the system unit. In modern models it is located on the front panel. Now take the cable attached to the webcam and plug it into this connector.

Before connecting the camera to a computer,once inspect it: very often the device is equipped with an additional cable, which is designed to connect the microphone. This wire should be connected to an empty slot located in the sound card of the computer. However, it is worth remembering that in older models of sound cards there is no possibility to switch the mode of operation of the channel. If it has a dedicated port for connecting a microphone, then you need to use it.

The next step is how to connect the camera to thecomputer, is the installation of drivers and software. They are usually supplied with the device. If these files are missing, you should visit the official website of the manufacturer of your web camera. There you need to open the download section and download all the programs that will be needed. Thanks to such actions your device will work stably, and you can always change its parameters.

After completion of all the above operations, bothconnect the camera to the computer, the latter needs to be rebooted. To check the operation of the device, use any of the programs designed for two-way video communication, for example, Skype. Check the camera's microphone separately. Its sensitivity can be adjusted by using standard operating system tools or another program. Make an active function that removes external interference.

If you are interested in how to connect the cameravideo surveillance to a computer, then perform the same actions as with a webcam. However, some video systems can be connected using a switch and a normal network cable, so you need to consult with a specialist before purchasing a device, which connection method will be optimal for you. After the device is connected, the computer automatically determines this and asks for installing the drivers. You need to do this by inserting the disk that came with the device and double-clicking on the installation file. Once the program is installed, a shortcut will appear on your desktop, clicking on which you can run it and make all necessary settings. Next, the program will ask you to specify the folder in which all videos will be saved in the future. It is better to install a separate local disk for storing such files, since there is a lot of information, and in case of virus infection or other errors, it can be encrypted.