We make toys with our own hands from plastic bottles

More and more parents are thinking about howmake toys with their own hands from plastic bottles. The material is always at hand in the required quantity, there is nothing complicated in this. So you can safely proceed. Another advantage of this technique is that there will be quite enough of a home set of tools, and something special for doing such work will not be necessary. The flight of imagination is not limited, it is possible to make everything that the soul will like.

Piggy for kids

Various toys with their own hands made of plasticbottles can be made with minimal labor costs. The easiest way to make a pig. For its production need two liter containers (from the cola fit best), scissors, marker tape (can be replaced with insulating tape), light and dark pink paint. Eyes are best done with the help of buttons. On each container, cut the base at a distance of 5 centimeters from the bottom. Apply them to each other. The teeth must be in antiphase at the bottom and at the top. For example, if there are two protrusions on the bottom and a cutout on top, then everything will be reversed at the bottom. We glue all this with tape in the middle. We apply lines of demarcation by a marker. We apply one type of paint, let it dry. A similar procedure for another. Glue the eyes. Everything is ready. In a similar way, such toys can be made with their own hands from plastic bottles: a cow, a bull and a lamb.

Christmas tree basket

To make this craft, you will need one 2-liter green bottle,

scissors, a sheet of paper for packing gifts, a knife,a simple pencil, a ruler and an adhesive tape. At a distance of 10-15 cm from the bottom cut off at the container. We make strips of paper with scissors, first drawing it out. Their length should correspond to the perimeter of the circumference of the container. Then we apply the strip to the workpiece, draw it, after every 2 cm we make an incision. In the resulting holes we stretch the paper. The second row is done similarly, but only with the difference that everything is done in checkerboard order. That is, in one case, the paper must be outside, and in the next row it is already inside. And so practically to the very edge of the container. Top leave 1-2 centimeters for attaching the handle. We cut it from the upper previously separated part and glued it on both sides of the container. Similarly, other Christmas-tree toys can be made with their own hands made of plastic bottles. You can, following the instructions from the previous paragraph, make any craft and hang on the tree.

Flowers on the windowsill

A simple and at the same time elegant decoration of your apartment can become a bouquet of flowers. The easiest way to make tulips. On them and we will stop the choice.

Starting materials and components: 3 half-liter plastic containers, wire with a cross section of about 10 mm², green and red paint, scissors, awl, brush, thin wire up to 1 mm². Immediately we cut flowers buds out of the bottle caps. In the traffic jams we make holes and put them on the wire, from which 3 stems were previously made. From the remainder of the bottles, we cut out the petals. At the base of their stitches make holes. Next, applying a thin wire, attach them to the stem. At the final stage, everything is colored and let dry. The above algorithm describes how to make flowers from plastic bottles by yourself almost all without exception.

Conclusion

These are just a few toys with their own hands made of plastic bottles that can be easily and quickly made. It is from their manufacture that it's easiest to start your acquaintance with such handicrafts.