Simple pattern of tunic with a one-piece sleeve

Tunic - one of the few items of femaleClothing, which is ideal for both thin people and women in the body. The secret of harmoniously fitting tunic in any ensemble - in its color and in individual shaped lines. It would seem that there can be a special "bat" in the sleeve and a hem that is several centimeters shorter than the usual t-shirt? But if you correctly beat a thing, it will be an excellent basis for a stylish image.

In this article we will talk about how to build a pattern of tunics with a one-piece sleeve and which model lines will give this garment more chic and feminine.

Material selection

A lot depends on the tissue. Therefore, it is important to choose the right material for the product. For tunics, you must choose a knitted fabric, which will not collect any fluff and debris, and also crumble heavily. Therefore, cotton and velor are excluded immediately. For the winter version, you can choose diving or jersey, but for a hotter period, suitable micromassage and French knitwear.

Building a Template

Pattern tunic with a one-piece sleeve is goodthe fact that to create it you do not need to make complex calculations and create some grandiose drawings. Everything is built quite simply, and to develop the workpiece, you need measurements such as the length from the wrist to the wrist over the shoulders, neck circumference, girth of the hips and chest, and also the length of the product.

simple tunic design with a one-piece sleeve

The construction can be done directly on the fabric. The detail of the gear and the backrest are almost identical, except for the depth of the neck opening.

So, to build up the fabric fold in half so,so that the edges on both sides are obtained. If the web is stretched no longer across, and along or the pattern requires a direction of cut, then fold the material according to the requirements put forward by the quality and type of the fabric. Pattern tunic with a solid sleeve assumes that a cut is used in the work, which measures the width "from the wrist to the wrist", and along the height two lengths of the finished tunic from the shoulder to the bottom. Stages of construction are as follows:

on the bend mark the measure "from the wrist to the wrist" and find the middle of the segment;
at the designated center point, the neck is drawn according to the measure of "neck circumference" taking into account the model lines;
along the edge of the deferred segment, drop by 7-8 cm and lay the upper sections of the sleeves to the extremities of the neck;
further, focusing on the central point, denote the line of the breast (about 30-35 cm down);
on the line, in accordance with the center, marking the half-mantle of the chest + an increase of about 5 cm;
further outline the lateral seam of the shelf and, rounding it in the armpit region, designate the lower seam of the sleeve, taking into account the circumference of the wrist;
if the measure of girth of the thighs is greater than that of the chest, then the tunic is expanded to the bottom.

Modeling

Pattern tunic with a one-piece sleeve canbe slightly modified. This will change its style and give the product a new look. For example, if the sleeve is made without a top seam in length of three quarters and wide enough along the edge, it can be assembled on the cuffs. This will hide the fullness of the hands of the girls of magnificent shapes. The same suits will come with cuffs at the bottom of the hem, which will visually adjust the ratio of the hips and waist.

Pattern dress tunic with a one-piece sleevecan have a deep cut on the back, decorated with lace tattoos or guipure. The same inserts can be made on the shoulders. Thanks to the combination of a smooth cloth with a textured lace, you get a spectacular outfit, a simple cut of which will be filled with the chic of used fabrics.

Assemblage of details

The best variant of processing of jersey is overlock. However, if there is no such unit, you can limit yourself to machine stitches. Lace is best to sew in a small zigzag exactly, as well as lay the main stitches. But the processing of slices can be completely omitted, especially when it comes to fine knitwear. Usually such material does not crumble and it is possible to leave seams without such processing.

Simple pattern of tunic with a one-piece sleeverequires only 4 major seams, processing the neck and the hem of the sleeves and the bottom. If it is planned to make slats on the bottom, then the most difficult thing is the processing of the neck. There are several options for its design:

make the flanges about 5 cm wide;
turn inside out and tune;
treat with oblique bake from the same fabric.

Each of them is good in its own way, the easiest option is with a skew-eye. Such processing is performed with one closed upper sleeve seam, the second is closed, taking the edges of the beiki into a slice.

pattern tunic with a one-piece long sleeve

Wrapped inside out and tuned sliceThe neck is suitable for well-stretching canvases. It is important to correctly distribute the tension so that the bend is even and does not frown from the line. It is best to decorate the neck in such a way that the upper sleeve seams are closed. Beforehand, you should press the bend and sweep it manually, and then detach it with a machine.

In the case of a collar, the neckline is veryneat. To make such processing, you need to cut out a detail from the main fabric, repeating the throat sections to a depth of 5-7 cm. Sew this element to the base face-to-face on the cut of the throat, make incisions, turn out and press inside out. In this case, the upper sleeve seams should be closed.

In the case of an overlock, especially four-thread, the sewing machine can be used only for sewing decorative elements. And all major stitches will be ready in one sitting.

Sleeve plays a decisive role

Pattern tunic with a one-piece long sleeve -this is a winter variant. For the summer, the model with a slightly lowered shoulder seam is more suitable. Of course, for this option will require less tissue, which means that the costs will be very minimal.

But what if you need a tunic with a longsleeve, and the width of the canvas does not contain a measure of "from the wrist to the wrist"? Here you can use the grinding method. That the thing looked beautiful, the seams should be symmetrical, and the refined details resembled narrow long cuffs.

Simple pattern of tunic with a one-piece sleeve -This is an excellent base for creating many outfits for any season. The main thing - to choose the right fabric. By the way, the combination of different canvases will also look original. For example, a winter model of a tunic can be sewn from a jersey linen. In this case, one-third of the sleeves can be made from a knitted mesh in accordance with the main fabric.

The sleeve can be beaten somewhat differently. For example, make it flared to the bottom and then assemble the cuff in the assembly. And that the folds look more impressive, make a sleeve of chiffon or silk. In this case, the pattern after construction on paper will need to be cut into elements, to cut out each of the corresponding material and sew together.

Decorative moments

Almost all girls like lace, frills,blyostochki, beads and other trifles, which makes clothes more fun. And why not decorate the tunic? A stone laid out heart or lace, lace flaps and bottom of the net, beaded appliqués, sequins and beads are an excellent decoration.

No less interesting will be tissue applications or thermal transfer transfers. There are lots of options for designing a tunic, the main thing is to trust your own taste and imagination.

Pattern tunic with short sleevescan easily turn into a basic summer dress. Add a belt to it, and this option is perfect for a trip to the beach, and with girlfriends in a cafe, and with children in the park.