How to make a book yourself - an instruction for beginners

Even in the age of information technology, the book does notceases to excite the minds of many people. It appears on paper and electronic media, can be provided for free or sold for absolutely unimaginable amounts. However, with the entry of Internet resources into household circulation, the question arises how to make a book with your own hands.

Such a book can be a collection offavorite poems or abstracts, and can contain a selection of original recipes. It is designed as a gift or gives it a developmental direction - all the variety of options depends only on the needs of the person who asked the above question.

The basic technique of creating

Make a book with your own hands is relatively easy. To do this, you will need:

1. text, in one of the following formats: .doc, .pdf or .djvu. The main condition is that the number of pages should be a multiple of four;
2. paper - it is best to use specialized. However, you can use the usual;
3. stapler or thick thread with a needle, hacksaw for metal, construction (!) glue PVA, cotton monophonic fabric;
4. thick (more than 2 mm) and thin cardboard, glossy paper or a cut of leatherette

Instructions on how to make a book with your own hands, contains two main steps: preparing content and creating a cover.

The first step is to print the desiredtext. To do this, create brochures with a volume of forty pages each. Next, each of the brochures, sew or fasten the stapler in the middle. Then, having combined the received mini-books into a flat pile, send them under the press. Such a press can be done with the help of improvised means, for example: cutting a board and one dumbbell weighing ten kilograms. In a similar state the future book should be about an hour.

Further in a pile of brochures the cuts from an end are madethe book being formed. To do this, using a hacksaw, a groove with a depth of three millimeters is cut evenly by a step of two centimeters an even number of times. After that the end of the book is abundantly smeared with glue and is clad in a piece of dense fabric along the length equal to the parameters of the brochures, and on the width - on the front sides about three centimeters. The internal contents of the book are ready.

Make a book with your own hands is impossible, if notto clothe her in a worthy "garment". To do this, proceed to the second stage. From thick cardboard we form two rectangles. Their parameters should exceed the length and width of brochures by 0.7 centimeters. From thin cardboard we also cut out a rectangle of length that coincides with the length of the blank from thick cardboard, and width - with the end of the formed stack of brochures. Then from the dense fabric we cut out two cuts: the first is equal to the length of the thin cardboard and its width is +6 centimeters, the second differs from the above in length by seven centimeters.

Having prepared the details, we begin to formcovers. To do this, place the three rectangles tightly together so that the narrow one is in the middle. The first piece of fabric with glue is placed on the rectangles so that it evenly comes to the edges of wide pieces of cardboard. Next, the second section of the fabric is abundantly lubricated with glue and positioned along the width of the first so that along the length it evenly comes to the other side of the workpiece. When the glue dries, decorate the front side as you like.

The last step of the instruction on how to makebook with your hands, is to connect the contents and cover. For this, the end of the brochures is smeared with a lot of glue and the cover is planted on it. After that, the first and last pages of the booklets and the covers of the book are pasted with sheets of paper, similar to the one on which the pages were printed. The book is ready.

How to make a notebook yourself?

Depending on what type of notepadit is necessary, the process of its creation is also under construction. If you want to create it in the form of a mini-book, in this case you just need to follow the instructions on how to make a book yourself, excluding the item about printing pages.

But there are other ways of making thisuseful subject. There is a very simple method of how to make a notebook yourself. To do this, you will need a piece of paper in the format of forty to forty centimeters, thick cardboard, glue, scissors, braid, pencil and ruler.

A sheet of paper is divided into squares of tencentimeters. Then cut along the parallel lines as follows: the first line is three squares, the second line starts from the square that has not been cut, and only three squares are cut again, the third replicates the first, and the fourth duplicates the second one. After that, the "harmonica" is formed from the prepared sheet. From the cardboard the squares are cut with a side of 13 cm and are glued to the first and last sheet of the accordion. The notepad is ready. For decoration on the front side we attach the braid and form the ties.

The presented ways of making books and notebooks are just a base. With a certain amount of fancy and skill, you can create wonderful unique prints.