We sew the house with a siding with our own hands: the features of the process

The appearance of the house plays a big role. And much will depend on how you decorate the facade. This article will tell you what siding is for your home.

Different materials are used to coat the house withof the front part. Among the facing materials, siding is one of the most widespread now. But you still need to install it. And it is not always the call of specialists that is rational. So, we lining the house with a siding with our own hands. When facing the facade of the house, the first thing to do is to remove the surrounding territory. When everything is cleaned, you should take measurements. Set the profiles in the left and right corners of the house. Using the level and the plumb line, pull the thread along them along the whole wall. When using a thread, you will be more evenly exposed profiles along the entire length of the wall.

We sew the house siding with our own hands further. For this, it is necessary to prepare the basis for fixing the material. After the frame is finished, you should proceed to the assembly of the profiles. It is to them that you will then strengthen the siding. Set the horizontal profile to the level, and then on the entire wall, apply the markings for the hangers. Secure the hangers to the wall of the house.

Using a special drill for a perforator,drill a hole 6 centimeters deep. Then apply the hangers, which secure on the dowel-nails. Profiles expose on the same thread, and fasten them to self-tapping screws with a press washer. For each profile, you will have 4 suspensions per vertical. Now, on the threads, set up the vertical profiles and secure them on the suspension from both sides using a press washer. When we are lining the house with a siding with our own hands, we should not forget that the whole structure must be stiffened. To do this, add horizontal profiles, which in the future will need to be strengthened with suspenders.

Mounting of the anchorage (if any) in the datafacing works is no less important occupation. To do this, set the horizontal profile, focusing on the bottom line of the vertical profile. Remove the gauging from the pit, using a level and a square. Now collect the knees from the profiles. Support them, using as a basis a special bar, which will be fixed by means of dowel-nails. To ensure that the anchorage is strong, it is necessary to install horizontal profiles over the corners of the knees, fixing them to the press washers.

We pass to the final stage: lining the house with siding. Mount the vinyl siding starting from the top down. Press washers tightly. Joints that you will appear, close the docking slats. Windows, too, design a special. The siding has a drawback - at low temperatures it can break and crack. Therefore, it is best to cut the siding in a warm room. Collect the cornice and dress the gable.

This finishes the facade of the house completed. It is worthwhile to understand that when we sheat the house with a siding with our own hands, we get an invaluable experience. Good luck in facing works!