Quality installation of the interior door with your own hands
If you need to install an interior doorwith your own hands, you should first learn the manufacturing technology and quality assembly of the structure. This will give the room a beautiful appearance and functionality.
It is the right installation of the interior doorwith their own hands in many ways determines the durability and reliability in the process of operation. Of course, the best option is to entrust the installation to experienced professionals who, when carrying out work, guarantee high quality. Very often, firms that sell interior doors or doors to the kitchen offer installation services tailored to individual needs and in accordance with the measurements of the doorway.
First of all, the installation of the interior door itselfwith his hands involves checking and preparing the canvas, as it is necessary to make sure that there are no chips or cracks, which are the main reasons for poor-quality installation and deformation of the entire structure.
At the first stage it is advisable to check the levelsex. This is done using a building level, which is located in a horizontal position. As a rule, the permissible difference in the values of the sides of the opening is not more than 3 mm.
At the second stage, the box is assembled,which is a two pillars and a top, connected together in the form of a letter P (it is necessary to make it there to form an angle of 90 degrees) with screws.
Next, installing the interior door with your own hands involves fixing the assembled box into the prepared doorway. It should be taken into account that the hinge post is located in an upright position.
After installing the door with your own hands beginsthe process of foaming. This stage is mandatory for high-quality installation, since it is necessary to securely fix the door frame in the opening without the formation of any gaps and large cracks. As a rule, for fast and high-quality zapenivaniya, it is advisable to glue the box with special construction tape, which will prevent direct contact with the outside of the jambs. After the final drying of the mounting foam (about a day), you can begin to cut off the excess.
Only after this it is necessary to begin to install the clypeus, which, as a rule, is fixed in prepared grooves with the use of sealant.
Standard interior doors are equipped withuniversal lock, which can be locked to a key or by means of a special rotary button. If you want, you can change the direction of opening the interior door, if you take into account simple rules. For example, you can turn upside down the door itself or the lock mechanism.
The importance of the operation processinterior doors, as this depends on the durability, reliability and beauty of appearance. It should be noted that the door must be regularly cleaned from various contaminants, and also use special means to preserve the original characteristics of the material used. For example, the painted or lacquered surface of the door is cleaned with a soapy solution with a soft cloth or a sponge for utensils. More complex contaminants and old spots are removed with a cloth soaked in turpentine. Do not use a variety of solvents, as they adversely affect the surface of the door leaf. Laminated doors are also cleaned with a soap solution or alkaline solution. In any case, after using different solutions, it is necessary to wipe the door with a clean rag and then remove moisture residues, as it can cause deformation of the web and deterioration of the material parameters of the interior door.
