Heater "Izoboks": technical characteristics, reviews

The market of building materials offers a hugenumber of different heaters. Their quality depends on the energy consumption of heating systems, comfort of home owners, apartments. Modern varieties of thermal insulation differ in a number of parameters, as well as in cost. When choosing, also pay attention to the method of installation, the features of the operation of the finish in the future.

One of the popular varieties is Insulant "Isobox". It includes a wide range of materials that are used for various construction projects. It will be discussed further.

Manufacturer

Heater "Isobox" was introduced in the market of insulation materialsin the year 2007. It is produced by a large domestic company TekhnoNIKOL. It has been operating since 1992. This brand is a global supplier of various insulation, sound and waterproofing, as well as products for building highways.

When creating their products, "TechnoNIKOL"applies new scientific developments, improved technologies. Thanks to this, the presented products fully comply with modern building requirements.

Products "Isobox" today is released at 14enterprises in Russia. The quality of the products is constantly improving, but experts note that this figure may differ depending on the manufacturer. The main profile of the company is the production of heaters based on mineral wool.

general characteristics

Characteristics of insulation material "Isobox" may vary depending on the purposematerial. This allows you to choose the optimal variety for different operating conditions. There are several main directions when creating thermal insulation.

The presented brand delivers to the marketroofing materials, waterproofing, various mastics and primers, thermal insulation. The latter category includes a whole group of heaters, which are created on the basis of mineral wool.

To the main parameters by whichThe presented materials include thermal conductivity, density, resistance to deformation. Also the cost of mineral wool is different. Corresponding groups of heaters are used for interior and exterior decoration of premises, roof, floor, etc.

Raw materials for production

Series that are in high demand are insulation "Isobox Extralight", Inside, Ruf, and others. In the process of manufacturing thermal insulation the latest technical developments are applied.

Mineral wool is environmentally friendlymaterial. It qualitatively keeps heat inside the room. At the same time, the presented material has a mass of advantages over other types of thermal insulation.

Iosboks brand heat insulators are manufacturedin accordance with the terms of the international certificate. Basalt stones, marls or other analogue raw materials are used as the basis for manufacturing. During production, coke, feedstocks and slags are added to the blast furnace. The process of creating mineral wool passes at a temperature of 1300-1500 ° C.

Creating stone wool slabs

Heater "Izoboks Inside" "Vent", "Extralight" and other modificationsare produced in an automatic process. In order for the fiber to take a uniform structure, it is subjected to special treatment. For this, blowing, roller-centrifugal and centrifugal-blowing units are used.

The consolidation of mineral wool occursby means of special additives (phenol). Also, the plates are subjected to pressing, cutting (giving standard dimensions). After finishing, the resulting panels are packed and stored. For this, vacuum bags of durable plastic are used. Also an important stage in the production is the quality control of each batch.

Mineral wool can not be installed andstored in an open condition in conditions of high humidity. In this case, it loses its properties, begins to lose heat. Therefore, during installation, the manufacturer's recommendations are taken into account.

Specifications

Before buying, be sure to consider technical characteristics of the heater. "Isobox Extralight", "Inside", "Rufus" and other popular serieshave an acid modulus that is 1.7. This means that mineral wool is resistant to various chemicals that are present in the composition of masonry materials. It does not interact with dry mixtures, cement mortars, plasters and other finishes.

The presented insulation is characterized bypractically zero thermal conductivity. However, it should not get wet. Otherwise, it loses its original properties. Mineral wool badly absorbs water. It is not subject to various mechanical, physical effects. Aggressive environments have no influence on the material presented. It is a durable, durable insulation.

However, mineral wool is a vapor permeablematerial. Therefore, mounting it indoors, it is important to provide a quality layer of outdoor insulation. Otherwise, the "dew point", which has shifted inside the room, will lead to the appearance of condensation on the wall.

Benefits

Basalt insulation "Isobox" has a number of advantages over other typesthermal insulation. It refers to environmentally friendly materials. It does not harm human health and the environment. Although phenol is used in its production, this unsafe substance evaporates even before the plates are packed in polyethylene. The end consumer receives mineral wool, which does not emit any harmful substances.

Also the presented heater does not let outstone dust. It has no smell, does not emit fumes or gases. This is especially important for people with allergies. They can safely be near this material, mount it, etc.

The material is not subject to deformation, tears. It has high thermal insulation performance. Mineral wool is thick enough that it can withstand various loads. Depending on the density, the insulation has also soundproofing qualities.

Heater "Extralight"

One of the most popular materials is the seriesExtralight. It is used to insulate structures that are not subject to stress. It can be pitched roofs, lofts, attics, interfloor overlappings, interlag space, frame wall structures, etc.

Several types of insulant "Izobox Extralight" are available in several sizes (1200: 600: 50mm, 1200: 600: 100mm, 1200: 600: 150mm). The cost of production is from 600 to 750 rubles.

The presented wool has a density of 30-38 kg / m³. Herewith, her water absorption is 0.5%. The thermal conductivity is at the level of 0.039 W / (m * K). It is a non-flammable material that is used in various household and industrial facilities. The presented material can be used at temperatures from +400 to -60 ° C.

Inside Heat Insulator

Considering technical characteristics of insulation "Izoboks" should pay attention to such a popularseries, as "Inside". This is a hydrophobic material, which differs incombustibility. It is used for the arrangement of thermal insulation in the well, when creating ventilated facades with two-layer technology. Also it is often used for insulation of frame structures.

The presented material is produced in plates 1200: 600 mm in size. The thickness is 50, 80 and 100 mm. The cost of the presented series is 700-900 rubles.

The density of this material is 40-50 kg / m³. Water absorption is 1%. The thermal conductivity is 0.037 W / (m * K). When exposed to the load, the stone wool is deformed by no more than 10%. This is a durable, high-quality material, which is in demand today in various areas of construction.

Features

Features Isobox insulation Every construction worker who choosesa heater for various objects. This stone wool can be used at all sites in our country, regardless of the climatic zone. At the same time, it is necessary to select the type of insulating material correctly in accordance with the operation features.

The material does not burn, does not smolder, does not emit whenelevated smoke temperatures. When the plate is immersed in water, it absorbs no more than 1% of the liquid. At the same time, the indicator is not affected by the period of stay of cotton wool in the liquid.

Thanks to good vapor permeability of the building facadewell ventilated. This avoids condensation on various surfaces. Mineral wool is characterized by a long period of operation. It does not require replacement for 50 years. It is resistant to various adverse effects of the material.

Reviews of professional builders

Reviews about the insulation "Isobox" leave professional builders. They argue that the mineral wool of the domestic manufacturer is of high quality. It is light, but sturdy. In this case, the installation of thermal insulation is simple. Vata heavies the construction of buildings slightly.

Before installation, the vacuum package is opened. The material is left for 5 minutes. During this time, the panels acquire their natural appearance. After that, they can be mounted on the prepared surface.

Quality finishes when using basaltcotton wool remains consistently high. Wadding does not collapse under the influence of different temperatures, does not burn and does not smolder. On indoor surfaces, condensation does not appear. With the correct choice and installation of plates it is possible to create a reliable, durable insulation layer.

Customer Reviews

Considering customer feedback on the submittedinsulation, we can note the predominance of positive statements. Many owners of private property, which used Izobox for insulation, note the acceptable cost of the material.

Thanks to the extensive dealer network,You can buy the necessary heat insulation in almost any city in our country. It showed its high efficiency in the process of operation. Heater allows you to significantly reduce energy bills. It is durable, durable and reliable material. It is chosen by many domestic homeowners for various buildings, structures and premises.

Having considered the features insulation Isobox, we can note its high quality. It is an environmentally friendly, reliable material that has been in operation for several decades.