Folding table with own hands: drawings, design features and recommendations

A very convenient solution is a folding table,with his help you can change the place of deployment of the feast, and also take a design for nature. Such a product does not take much space in the interior, because when you do not use it, the table can be folded and put behind the door.

Preparation of tools

Folding table with their own hands can beis made by any house master who has ever dealt with wood in his life. However, for carrying out these works, a certain set of tools and materials will be needed. It is necessary to prepare a screwdriver with a quick-action chuck and a set of bits, a grinding hand-held machine, a tape measure, a pencil, an electric jig saw, a construction level and a right angle.

If there is no grinding machine, then get itfor one time there is no need, it is best to use sandpaper, while you can finish making the table, making its surface smooth. Some modern stores offer consumers the use of such equipment for hire.

Preparation of materials

Folding table with your hands you canDo it in one evening, if you have all the materials you need. You will need two types of rails, one of which must have a cross section of 30 x 50 mm, while the other should have a cross section of 20 x 40 mm. In the first case, you need to prepare four elements, the length of each of which is 1200 millimeters. The total weight of the latter should be 5 meters.

For the manufacture of table tops you can useA glued array that is made of pine. A reliable and durable option will be a table top, the thickness of which varies from 30 to 40 millimeters. A piece is cut from the workpiece with the following dimensions: 1300 x 650 millimeters. Each component is well treated with sandpaper, and then covered with varnish, which should be done before the time of assembly of the structure. Reiki, which will form the basis of the legs, should be rounded in the upper part, and then well polished.

Additional preparation of elements

A folding table with its own hands is made byThe dimensions that will suit the future owner. But the technology remains the same as described in the article. Thus, in the legs, which are not cut to length, it is necessary to drill through holes, they will be needed for frame bars and axial bolts. Diameter under the fasteners should be 8 millimeters, and under the slats two holes should have a diameter of 5 millimeters.

In the central part of the bar, it is necessary to drill a hole for the axial bolts, retreating from above 430 millimeters. Skeleton strips are marked on the eye, however, it is necessary to observe symmetry.

Nuances of works

Folding table with own hands is madeby a certain technology, it provides for the creation of goats and countertops, these components should not be fastened together. In the countertop you need to make grooves, where they will be installed, and after wedging the legs. Special nests must be made in such a way that their fixing to the table top is done by self-tapping 4 x 50 millimeters.

The next step is to proceed to assemblystructure. If you decide to make a folding table with your own hands, then the goats should look like a clamshell, this system will save space in the house or trunk of your car.

Initially, the legs should not be sawed from below,but they should be approximately the same. Axial bolts also do not tighten to the end, so that the legs can be spread out. To secure the tolerance, you must use the locknuts. The master can purchase absolutely any bolts, however their length and diameter should be suitable. For the feet, for example, bolts 8 x 70 mm should be used. In the grooves of the countertops, you should apply the limiting bolts, the parameters of which are 8 x 120 millimeters.

Advice from a specialist

When a picnic folding table is being builtwith your own hands, at the next stage you can install the upper ends of the legs in the unfolded state in the grooves of the countertop. An unfinished design should be installed on any flat surface to determine how much to cut off the legs to eliminate the error in length. Be sure to use the building level. When adjusting the length, one should not be particularly zealous, for carrying out these manipulations you will need a jig saw. If the table is to be used only in nature, then the generally accepted height of 750 millimeters should be reduced, since sitting behind such a construction will have to be literally on the ground.

Manufacture of a journal folding table

Folding coffee table with your hands youyou can also make, his photos are presented in the article. The frame is assembled for confirmation, while using a special drill bit. The marking on the surface of the chipboard can be done with stickers, as the pencil is not visible, its lines are flashing. In the framework that has the shape of a rectangle, you should install a transformation mechanism, but before that, springs are installed that help to unfold the structure. The mechanism is fixed through the way, because the weight of the table will be impressive.

Folding legs should hide all technicalfasteners and holes. Markings for fastenings can be done in the same way. Through holes for bolts should be prepared in the next stage, then the drill denotes the place for mounting the head of the bolt. This fastener will fix the mechanism, but do not be afraid that the number of fasteners is large enough. Legs have the form of a rectangle and should be as strong as possible, since the weight of the entire structure is approximately 45 kilograms. Between these components should be fixed screeds.

Folding table with own hands, drawings of whichpresented in the article, maybe you are done in one evening. The next step will be screwing the legs to the structure itself, for this, the markings are initially marked. You can drill in place if you have enough experience. It is recommended to install the device on metal bushings. For this fasteners, holes are drilled in the legs. To the four sides are set legs, which will hide the technical holes in the frame.

Assembling the table top

The worktop must be assembled with a specialaccuracy, since the hinged unfolding is sufficiently strong and ensures smooth sliding of the elements. Keep the hinge in the nests hard enough, and screws with this task can not cope. Therefore, you can purchase other hinges. The worktop of such a construction is divided into two parts, first a small one is installed, then a large one. On this we can assume that the table is ready for operation.

Recommendations for the manufacture of universal construction

Folding table for a picnic with your own hands,the drawings of which are presented in the article, can be manufactured to individual sizes. The design you can perform on the principle of a table-book, which has an attractive appearance. To do this, you need to prepare two legs, a king, a podstole, 4 horizontal and two vertical beams, a movable leg and piano loops. All cuts must first be machined with an edge. After the central part is fastened. The next step is to assemble the countertop and fix the cover to the butt end of the legs. The mobile element with a frame is mounted on the piano loops, only after this the table can be assembled completely, and if necessary, varnished.

Conclusion

When the walking table is foldingwith their own hands or the construction of any other type for eating, the special difficulty lies in the preparation of the details. It is better to entrust them to professionals if you do not have special skills and tools. But the assembly each master will be able to do on his own.