Heat carrier "Warm House Eco-30": reviews, instructions, specs

Heat carrier "Warm house ECO-30" representsis an antifreeze, which is used for heating, cooling and water supply systems. In the production process, patented inhibitors with corrosion resistance are used, as well as additives that guarantee protection of the equipment against corrosion, freezing, foaming, deposits and scale. The product is perfectly compatible with seals and plastic materials, as well as rubber.

Specifications

Heat carrier "Warm house ECO-30" has a highstability and guarantees a permanent job for five years. In order to obtain a mixture of the desired temperature, it should be diluted with ordinary tap water or distilled water. If you add 10% of the liquid, the start temperature of the crystallization process will be -25 ° C, when the volume increases to 20%, the temperature rises to -20 ° C.

The system can not be destroyed, because the describedThe antifreeze does not increase in volumes when freezing, but only becomes jelly. Heat carrier "Warm house ECO-30" can be diluted with water, this allows to reduce its viscosity and increase heat capacity, as well as improve circulation.

The best solution is dilutionmeans to a crystallization level of -25 ° C, this is true for electric boiler equipment. If it is a question of gas boilers, this parameter should be -20 ° С. Using in the work of a composition that has a lower crystallization temperature can cause glial coke on the TENs or in the burner area, which will lead to the formation of resinous sediments and a situation where the heating elements are simply burned out.

How to avoid decomposition

Heat carrier "Warm house ECO-30" canIt is used for a period that will depend on the operating conditions. Do not bring the product to such a temperature that it will boil, because when the temperature increases to 170 ° C, thermal decomposition of additives and propylene glycol begins to occur. Therefore, in the boilers should ensure a good circulation of the substance described.

Customer Reviews

If you decide to use for a heating systemhis home heat carrier "Warm House ECO-30", reviews about it will help you understand its features. So, consumers argue that to eliminate unpleasant situations, the coolant should be diluted, as recommended above. It is important to supplement the system with a good circulating pumping unit, which has more outstanding characteristics than those that operate on water.

As for productivity, howsay consumers, this parameter should be 10% higher, while the head should be more by 60%. At negative temperatures, the coolant, according to customers, should be heated gradually, and immediately turn on the equipment at full capacity should not be.

According to experts, the heat carrier "Warm HouseECO-30 (20kg) has a more impressive expansion coefficient, if compared with water, which indicates the need to comply with the volume of the expansion tank. This parameter is 15% of the volume of the coolant or more.

Buyers also like the fact that thefunds are absolutely safe for human and animal health. The composition has a tolerance for use as a coolant in the food industry. However, this does not mean that the product can be eaten!

Evaporation of such a coolant completelysafe for health. Buyers especially emphasize that the heat carrier "Warm House ECO-30", the characteristics of which are presented in the article, is explosive and fireproof, it has a certificate of compliance and conclusions of sanitary and epidemiological services.

At the end of 5 years after operation, thisthe substance becomes a low-freezing liquid, but the resource of additives will be exhausted, as well as the ability to counteract corrosion. That is why the heat carrier "Warm House ECO-30", the instruction manual for which will be presented in the article, must be merged and utilized. Before pouring in a new coolant, it is important to check all the connections and rinse the system.

Instructions for use

Heat carrier "Warm House ECO-30" (20 kg) shouldpour into the system with galvanized pipes, as their internal walls can cause precipitation. It should not be used in systems with electrolysis boilers and do not need to be mixed with other heat carriers, without first checking what the consequences may be. The simplest version of the outcome in this case will be a deterioration in the performance characteristics of the composition.

The coolant is intended only for technicaluse, because ethylene glycol when ingested is a poisonous substance. In order to avoid poisoning, it is important to be sure that the product does not enter food or water. If the composition has got on the skin, then it should be washed thoroughly with soap and water.

Additional recommendations for use

If you decided to dilute the coolant with water fromwell or well, where a high content of metals and salts can be noted, the agent should be mixed with water in a transparent container. It is important to keep the right proportion. Once you make sure that there is no sediment, you can mix in the correct volumes to fill the heating system.

You can do this before the fund is insystem, which particularly applies to systems that operate on the principle of natural circulation. As an alternative solution, the technology is sometimes used, in which the pouring takes place in turn, the heat carrier can be prepared in separate small portions.

Conclusion

Heat carrier "Warm house" is supplied in a containerdifferent volumes. The latter varies from 10 to 50 liters. If there is a need to purchase a more impressive volume of the said composition, then it should be made to order. In this case, the volume of the barrel is 216 liters. Sometimes the product is shipped in bulk, for which fuel trucks or cubes are used.