How to outweigh the door of the refrigerator "Atlant" independently

Home comfort is a delicate matter. From time to time, owners of household appliances need to rearrange their electrical assistants in a more convenient place: after moving or during the reorganization of the usual kitchen space. In a number of cases it is found out: the door of the favorite closet, which saves products from rapid damage, can not remain in their previous positions. Urgent need to dismantle the door to the right and fix it on the left (or vice versa)! It's complicated? How to outweigh the doors of the Atlant refrigerator by yourself?

For right-handed and left-handed

The brand for mastering the algorithm of actions is not chosenaccidentally. The household appliances of the closed joint-stock company "Atlant" have long been firmly established in the everyday life of Russians, residents of the countries of the Union of Independent States. Let's remind: the Belarus company from 1962 for 1993 bore the name "Minsk factory of refrigerators". The enterprise is distinguished by its quality assembly and the availability of some special features in many models, in particular, such as changing the position of some elements.

Having learned in detail how to outweigh the doorrefrigerator "Atlant", we will allow ourselves to expand the horizons of fantasy: in the house or apartment there will always be tempting points for mastering: the corridor, the space under the stairs to the second floor, near the window, etc. Most often, the leaf is installed on the right. If you are left-handed, you may also need to reinstall. As practice shows, the operation is not too difficult and complicated. It is enough to strive for independent action and a little perseverance.

Before You Begin

Knowingly in the old days they said: "Seven times measure cut once". In this case, read the instructions seven times, once with a screwdriver, open the door for the refrigerator "Atlant". Or even a few such "wickets" - ZAO produces household appliances with one, two and three cameras. In each particular version, you need your own approach. Although there are universal steps.

Make sure that there are spare stubs orThere is an additional detail in the kit. In the first case (1 camera) outweigh not only the outer door (on which many have beautiful magnets), but also the internal one - from the freezer. In the second and third (2-3 chambers) - only the outer sashes. Consider different positions (about the camera and the freezer door - for details).

Instruction manual carefully studied? Let's get started! When we outweigh the doors of the Atlant refrigerator, the first one is on the outside, after it is internal (from the freezer, with option 1). Pay attention to the warranty period: if it has not expired, do not interfere with the design yourself, instruct the specialist: he will fix the intervention in the special coupon. Otherwise, if the unit breaks down, you will find yourself in the difficult position of the violator of the contract.

We follow the instructions

The warranty has expired, and you decided to take up thethe case yourself? Then it's time to collect the necessary tools, especially if they are stored in different places: some on the balcony, others in the garage, others in the basement.

• The most important thing is a screwdriver (figured and conventional). A penknife (or usual) knife is useful - pick up and remove the plugs.

• You will need a spanner (10).
• It is irreplaceable hexahedron (unaccustomed to the masters of past years, and nowadays the widespread metal "zagulina").
• Do not forget about pliers.
• Pay attention to the loops of the freezer. New, which are required after dismantling previously installed, in advance, purchase at the service center or in the nearest market where parts are sold, they are not included in the kit.

So, how to outweigh the door of the Atlant refrigerator? Do not forget to de-energize the appliance (pull out the plug from the electrical outlet). Inspect the top of the opening: there are screws here, they need to be unscrewed. As soon as you do this, you will see how easily the part that contains the inscription "Atlant" is removed. Next, to start unscrewing the canopy fixings on the right (the plate with the shaft holding the door), close the sash tightly. Unscrew - move the part to the left.

Step by step

Open the door and gently remove it from thelower canopy. Do not pull open, do not jerk sharply - if the hood of the lower canopy is damaged, the process of rearrangement will become much more difficult. See the stub on the side where there is no door? Remove it with a knife (or a screwdriver, to whom it is convenient) and move to where the "leaf" slides.

If the refrigerator "Atlant" is a two-compartment refrigerator,it is not difficult to outweigh the doors with a separate fastening. Each camera is an independent element and is mounted according to a standard algorithm. If, with a common fastening on one axis of the freezer door and the common door, both parts are simultaneously dismounted and installed.

Remove the door of the freezer

We continue to seek an answer to the question of howto outweigh the door of the Atlant refrigerator. The door is off? It's time to reinforce the hinged handle in a new way: it too can not remain in its previous position. Now go to the lower canopies. The bar above the floor is removed with a screwdriver - hexagon. After removing the canopy, the door fastenings become open. Use a wrench to unscrew the multi-faceted metal plate (nut). The binding axis is removed and transferred to the desired direction.

As soon as the leaf is on the lower axis andmade a marking of bolts (slightly fixed), close the refrigerator. Before the end of the main tightening it will hold in place a magnetic seal. Please do not overdo it, be sensitive to the degree of action: otherwise, you can break the structure. Now go to the freezer flap. Both on the outside and on this door work is done with the seal removed. Remove the door, lift it slightly and pull out the stopper - half ring.

Make sure everything is done right

The next step is the transfer of the latch(the bushing of the upper shaft is removed and inserted into the right place). With a new canopy (you should have purchased it in a service center or on the market, since it is a "one-off thing" - made for a particular side). If you use the original - the door will not normally mount (some craftsmen come out of position and "drill" the holes).

The transferred door is again fixed by a semiringfrom plastic. All. The question of how to outweigh the door of the refrigerator "Atlant" is settled. Wipe the refrigerator, plug it into the electrical network. At the final stage, make sure that the doors of the freezer and the refrigerator are in close contact. The breach of tightness entails a lot of problems: the formation of thick layers of ice, the spoilage of products and even the breakdown of the cooling system.

If there is a display

Many people are interested in how to outweigh the doorrefrigerator "Atlant" with electronic control. There are no big differences in the process. Simply with equipment that has a display, the cable has a connector in order to make a disconnect if necessary. Just as described above, on the door leaf, unscrew the bolts, remove the decorative panel.

Fasten the fastening bolt on the upper hinge, taking outguide the cable, disconnect the line. Depending on the model, in the center or on top, unscrew the fasteners, remove the leaf from the hinges. Remove the top cover of the refrigerator (you will see the control panel). Move the hinges to the desired side, secure. There are models in which the process is done from the top down (the fastening column changes exactly there). After that, connect the cable and put it in the guide.