Wallpaper Sticker in the corners - technology and secrets

Among the many options for wall decorationwallpaper - the most common method. The industry produces a variety of types and types of wallpaper. About the number and design options can talk for a long time, only the list of types of wallpaper can take a sufficient amount of time.

There are even wallpapers that you can paint -special non-woven. An excellent option for those who like to change the design often - tired of one color, repainted, and the room looks different. Very sparingly, because you only need paint for non-woven wallpaper, which can be purchased in specialized stores.

Any finish must be done qualitatively andcarefully. Gluing the room with wallpaper is no exception. A lot depends on the quality of the work. If everything is quite simple with the walls, then the sticker of the wallpaper in the corners can present certain difficulties. Even in those apartments where repairs have been recently carried out, it is very rare to find perfectly designed corners. And any, even the slightest distortion leads to the fact that the wallpaper is inflated, bursting or going to folds. Therefore, the wallpaper sticker in the corners requires attention and accuracy of execution. There are some subtleties, knowing which, you can achieve perfect joints.

Sealing of internal corners

To do this, we glue a wall to one of the wallsso that it would go to the adjacent wall by 2-3 centimeters. It is necessary to make sure that the wallpaper is strictly vertical. To ensure the correct location on the wall, with a plumb line we draw a line along which we glue the panel.

If the angle is very uneven,need to cut the overlapping part on the adjacent wall. Sometimes this is the only way to make the wallpaper fit to the corner. If the paper is dense, it is better to use a special glue, which carefully smudge the edge of the cloth, then press it with a special sponge.

Now on the adjacent wall we will note with the help of thatthe plumb line is the gluing of the next piece of wallpaper. The distance from the corner to the line should be less than the width of the roll by 2-3 cm. We place the panel, adhering to the drawn sign. That part of the wallpaper, which comes to the adjacent wall, is smeared with glue for joints and carefully smoothed.

Now, armed with a building level orruler (better metal) and a sharp knife, cut off both stock immediately in the corner. The upper cut piece is removed easily, and the one that was under the cloth, we take out, bending the edge. We again glue it with glue and carefully press it. The wallpaper sticker in the corners in this way makes it possible to achieve an ideal joint.

Sealing of external corners

If the outer corner is perfectly even, then cover itit's very simple: you just need to wrap the cloth, carefully making sure that there is no air left. If the angles are uneven, then the following sequence of operations will be used.

We paste the wallpaper strip on one of the walls,positioning it in such a way that the edge protrudes by 2-3 cm, smeared it with glue for joints, wrapped, smoothed, making sure that it lay down smoothly. If this fails, you can make incisions in several places. The wound edge is cut with a sharp knife, leaving a very thin edge around the corner, which will not be visible through the top layer of the wallpaper.

The second cloth should be arranged so that itsedge by 5-7 mm protruded around the corner. We glue the second strip of wallpaper, wrapped in a lap. It can also be treated with glue for joints and carefully pressed. For these purposes, you can use a mixture of wallpaper and PVA.

Using these secrets, you can achieve that the wallpaper sticker in the corners will give perfect joints, and from this the overall appearance of the room will greatly benefit.