Installation under the toilet: dimensions, installation

Progress can not be stopped! With this statement, hardly anyone will want to argue: the technology is being improved, the imagination of many designers is also not far behind. Thanks to this, even in the arrangement of the bathroom there are interesting ideas. And it's specifically about installing under the toilet. Previously, something similar could be found in public institutions (shopping centers, restaurants, airports and other institutions). Such a solution fits perfectly into confined spaces of premises due to compact dimensions.

Now ordinary consumers of steelto look at the novelty, which is still fair, since similar designs appeared on the domestic market not so long ago. And the number of those who want to renew the interior of bathrooms is increasing every time.

A luxury item or still a necessity?

What is meant by the term "installation"and is it really necessary for all of us? In fact, this is an installation system that allows you to install one or many items of sanitary ware (sink, toilet, bidet, urinal). And in the bathroom you can choose almost any convenient place to install the installation for the toilet. The material of the walls also does not matter, and all plumbing will be safely hidden from the eyes. With the right arrangement in mind, there will be a toilet itself with a flush located nearby. That is, the whole setup is hidden.

In this case, in the optimal wayThe whole working space of a compact bathroom is used. And this is typical for the majority of multi-storey residential buildings erected in the Soviet era. Therefore, if you plan to carry out repairs in the toilet, you should think about a good update.

If the aesthetic component of the design of thispremises is especially important for various reasons, then such designs will be more than appropriate. And to finally make sure of the need for such a solution, it is worth to get acquainted with the obvious advantages.

Advantages of the installation

The great popularity of different types of installations under thethe toilet is caused by the fact that in everyday life the built-in appliances became increasingly used. And all due to the incredible usability and attractive appearance. Everything that looks bad is reliably hidden from view. And this applies not only to the kitchen, where it basically looks great, but also the bathroom.

Listing the advantages of flush mounting in this room, first of all it is necessary to distinguish such qualities:

• Compact design, due to which all the bathroom space is rationally used.
• Since the flushing tank is insulated, the operation of the whole system is also carried out in a noiseless mode.
• There are no hard-to-reach places, which means that every cleaning in the room will be easy and unconstrained.
• The installed design allows you to adjust the water flow.
• Aesthetic appearance, thanks to which the whole interior of the bathroom is transformed.
• Excludes any possibility of damage to the floor covering.
• You can install under the toilet pan with tiles without losing harmony in the interior design.

Quality structures are able to withstandload of about 400 kg. In addition, if we talk about compactness, lovers of minimalist style will just be delighted. But especially this solution is relevant if the bathroom is of a combined type. In this case, there is an opportunity to arrange a warm floor, as the bathroom requires that the floor covering has a heating.

In case of need for repair, accessto communications it is possible to receive through special hatches. Perhaps, there are much more advantages, but this is quite enough to become interested in such an innovation.

Disadvantages of installation

Unfortunately, as it always does, everythinggood is the downside of the coin. Some moments may not appeal to a number of consumers. The installation of the structure is not complicated, but it requires more investment than a simple installation of the toilet. In addition to buying plumbing and expensive installation of installations for the toilet, you also need to purchase the system itself. In addition, if necessary, replace the equipment will require a full repair. Self-installation will slightly reduce costs, which compensates for some shortcomings.

It is equally important to pay attention toThe condition of pipelines, since old pipes can not withstand the load. If you ignore this point, you should prepare in advance for the upcoming unreasonably high costs, which is unlikely to make anyone happy.

Classification of installations

Different manufacturers produce several types of installations. Usually these are two types:

• Block.
• Frame (there is a subspecies - angular).

Each type has its own characteristics, and alsoadvantages and disadvantages. To make the right choice, it is worth considering in detail each species. This will determine which installation is most appropriate for each particular room.

Block structures

The main feature of block products, which, according toEssentially, they are a box for installing a toilet bowl, it consists in the way of installation - they need a bearing wall. This design implies the complete assembly of all systems (water, sewage). All this is done in the factory. The presence of a bearing wall is due to the fact that the fastening is done by means of anchor bolts that are supplied together with the installation.

That is, all this looks like a candy bar,which is fully assembled and ready for use after connection. As a rule, the height of the structure is about 110 cm, no more, and it is completely mounted in the wall. If the bathroom has a niche, then this is the best option for installation. If necessary, you can perform the installation from the outside and with further laying.

If in the place where it is planned to install a toilet bowl, there is no wall bearing - installation of this kind is impossible.

Frame constructions

They are metal frames, which are equipped with adjustable legs. It is very convenient for choosing the required installation height for the toilet.

At the same time the frame is attached to the floor and wallby means of four main points (two on each surface), but the main load is perceived by the floor covering. However, there are models that are completely fixed on the wall. This variant also needs a bearing wall.

Frame systems usually have a standard width,which is 45-65 cm, and depth is 16-35 cm. While the height can be different, which is related to individual needs. Very popular designs have a height of 130-150 cm, but a number of consumers prefer low installation - 85-90 cm.

Being a subspecies of frame construction, angularInstallations are designed for installation exclusively in the corner of the bathroom, that is, at the junction of the walls. In doing so, it must be absolutely straightforward. This option is relevant for very small bathrooms.

The attachment can be to the wall and to the floor. In this case, there is a wide scope for the manifestation of their own creativity. However, mounting angular models requires larger investments.

What do you need to consider?

To make the right choice of installation fortoilet bowl, its dimensions should be taken into account first. In particular, it is important when it is planned to install the plumbing in a certain place. And here it is important to pay attention to the dimensions of the toilet itself (as a rule, the depth is 10-15 cm, width - 50 cm, height - meter).

Depending on the place of installation, each manufacturer is ready to offer a choice of this or that model:

• standard;
• island construction;
• double-sided option;
• linear solution.

Standard Installation can be installed in any convenient place in the bathroom.

Island The models are ideal for bathrooms witha serious restriction on height. The correct solution will be to choose a frame structure with a height of not more than 83-84 cm. A good option may be a model from the company Grohe, whose height can be adjusted from 82 cm to 98 cm.

Two-sided installation under the toilet allows you to use both surfaces of the wall (usually a partition). This is important for a separated bathroom, when the toilet is attached to one side, and the sink on the other.

Some models allow linearly arrange several units of sanitary ware. It can be several toilet bowls or a combination with a sink or other equipment. The manufacturer Flaminia on this account has a suitable option - Volo WS, the width of the installation is just over a meter (115 cm).

Popular models among many consumers

In order for the installation to work properly,you must select a reliable manufacturer. What does the rating of popular models look like in this category? The undoubted leaders in quality are Italian and German manufacturers. Accordingly, the cost of such products will be high.

Masters from Bulgaria or the Czech Republic can offerA good alternative, which corresponds to the market segment of the middle price category. Well, the cheapest products, as you might guess, are produced in the Middle Kingdom.

If you analyze the majority of user reviews, good quality products of several companies:

• Geberit.
• Grohe.
• Wisa.
• Cersanit.
• Mepa.

Consider in more detail if not all, then at least the top three.

Geberit

Installation under the toilet Geberit - this is one of the reliable implementations of sanitary equipment for the bathroom. The Swiss brand is very popular, and there are good reasons:

• First, you can mount the installation, despite any difficulties (too close location of pipes).
• Secondly, due to its high quality, the design can last up to 10 years.
• Thirdly, the installation itself is not as complicated as the analogs.
• Fourth, the manufacturer sells spare parts.

There were some shortcomings. The delivery set does not include fasteners. Well, the most important disadvantage is the high price, which can be even higher due to the more original design and a number of additional options.

Among many useful functions it is worth notinga system for eliminating an unpleasant odor. It will be especially useful if the family has representatives with a bad habit. Especially if there are still small children, who, for example, do not benefit from tobacco smoke.

Grohe

Installation under the toilet Grohe from the company of the same name is not less high quality of performance. And choose this design not only the organization, but ordinary consumers.

The frame of the structure is made of metal and covered with a special layer, which gives the product corrosion resistance. And the welded joint is performed at a professional level.

You can install the system in any accessible place,and there are no any difficulties in terms of installation. The drain tank is equipped with a special mechanism that ensures quiet operation. As for the guarantees, the installation, according to the manufacturer, will last 5 years.

But there are certain nuances: the toilet is not included in the delivery. In addition, due to great popularity, there are counterfeits on the market.

Wisa

Wisa was founded in 1903, andIts main activity is connected with the production of installation systems for various types of sanitary ware (toilet bowls, bidets, sinks, etc.). The rich experience accumulated over the years of hard work has allowed us to secure a beautiful future, and today it is not some small firm, but a real brand with a worldwide reputation!

Experienced engineers strive to improve the output and from time to time develop new models of installations for the toilet. The main highlight is as follows:

• The optimal ratio of quality, applied technologies and design solutions.
• The models produced are characterized by high functionality.
• In reliability and longevity of equipment, there is no doubt.
• The drain works noiselessly, which is important.

It is also worth noting that, in addition to the tank, the kit includes different elements (keys, buttons).