Low tide for plastic windows: varieties and design features

Outflow is called the lower outer part of the windowopening. These devices are necessary for protection against falling under the frame of water from the outside, which helps to avoid its decay. Therefore, they are installed immediately when mounting the structure. This is important in this case.

Already for a long time the ebb forplastic windows are an indispensable protection of the structure. Basically, these devices are made of galvanized rolled sheet, on which a protective layer with a polymer composition based on polyester is applied. This coating can improve the aesthetics of a building or office.

Tip

Low tide for plastic windows recommendestablish all specialists in this field. After all, if you do not use these details, the moisture will gradually fall inside the window design, and the process of destruction will begin. Of course, nobody will like it. Therefore, the installation of ebbs on plastic windows is an important process. As a consequence, it will be a big mistake to ignore the installation of this device. Already after a few years, windows without reflux will become worthless.

Varieties of the product

There are 3 main types:

1. Casting from aluminum

Such devices are made by the methodbending of strips of aluminum with millimeter thickness, followed by their painting by powder spraying. In the kit with the above-mentioned eaves there are side plastic caps protecting the wall of the building from water ingress. Basically, these products are painted in brown or white.

Aluminum castings are strong anddurable. To give hardness, this product is covered with varnish and polymer paint. Finally, a protective polyethylene film is applied to its surface.

2. Galvanized ebb

These products are made by bendingstrips of galvanized steel. They are dyed with polyester based paints. Galvanized ebb for plastic windows with this coating does not fade and does not crack. It is inexpensive. Slopes and slopes with plastisol coating have high resistance to precipitation and temperature changes.

3. Plastic outflows

The best solution is to use dataproducts when installing plastic windows. They are great for waterproofing. Plastic constructions do not need additional care, they do not fade and do not fade, they have a long service life. Also, such devices will improve the heat and sound insulation performance.

Conclusion

Choosing an ebb for plastic windows, you needtake into account the climatic features of the area. If you live in a zone with a harsh climate, then you need to choose materials that are resistant to significant temperature changes. But in any case, it is necessary to install an ebb for plastic windows. The price of this product is acceptable, it is affordable for every consumer - from 90 to 1200 rubles, depending on the size and material. If you ignore this aspect, then the window constructions do not last as long as they would like.