Double glazing. Benefits

Glass on the windows is a very important detail of anypremises, the last "instance" that keeps heat in it. To reduce heat loss, double glazing is often used. There are two ways to add a second window layer.

One way is to replace existingglasses with special plates (sealed modules). In this case, double glazing with tinting can be used. The second way is to install an additional layer on the inside of the existing one. It should be noted that secondary glazing is considered the most practical method.

Today you can find different types of frames for self-installation. It is possible to carry out both the casement and the sliding glazing.

Glasses are attached directly to the frames or to special paths located inside the openings.

Double glazing has an alternative. It can be replaced with a transparent PVC or acetate film. It is fixed inside the frame with a double-sided tape. It is considered effective, although not strong enough.

Double glazing contributes not onlyreduction of heat loss, but also eliminates the so-called "cold zones" next to the window. The additional layer significantly improves the protection from external noise. Provided good sealing, preventing penetration of moist and warm air, condensation also decreases.

Experts note a significant increase in demand forDouble glazing with triple and double glazing. To date, there are quite a few companies involved in the manufacture of such products. Some dealers produce parts for additional glazing without observing technological norms.

When choosing a glass for self-installation inThe window frame must pay attention to its thickness. It affects the efficiency of heat and sound insulation. The distance between the glasses also affects these parameters. Therefore, during installation, a distance of at least seventy-five millimeters should be maintained.

Sheet glass for windows is made fromtwo to six millimeters. For installation in living quarters, as a rule, sheets of two to three millimeters are used. In the aluminum profiles are mounted sheets with a thickness of five millimeters.

Experts recommend to use in residentialindoors a colorless cloth. It is allowed to install a pale green or bluish color glass. But it must be remembered that the selected sheet must pass at least eighty-five percent of the world.

Before installation, it is necessary to fit the glass to the size of the frame. Immediately before installation, the surface of the blade should be cleaned. Particular attention should be paid to the inside of the glass.

When attaching an additional frame, do not forget about the installation gap of twenty to forty millimeters. This will help to avoid freezing of the window in the cold season. The gap must be filled with foam.

At the time of our grandfathers there were no electric planes and mills, but they built houses for centuries. Be smart, do not get lost, and you will succeed!