The technology of creating a stand for boat motors with their own hands

In the presence of a boat with a removable motor is easyit is necessary to have a support for this equipment. It will provide the most comfortable transportation, ease of maintenance and safety of the engine in the winter. Such an adaptation can be purchased at the store, and also made with your own hand.

Rack Purpose

Boat support is designed for convenience and comfort of maintenance of the unit. It provides a long service life. The motor on the rack is located vertically in a suspended state.

The rack is an integral part for the owners of the suspension unit. Boat engine support with own hands will be economical. It can be designed according to its own convenient design. With its help it is possible to carry out stationary storage of the motor during the winter period or during its maintenance.

Fixing the motor on the stand will make it easierreconstruction, replacement of oil, lubrication of the screw, will make it easy to start the engine and perform other maintenance work on the outboard motor. Also, the transportation of the engine becomes more secure and lightweight. This product is the best invention for any owner of a boat engine. It will allow you to easily and conveniently solve most of the nuances associated with maintenance, repair, tuning or conservation of the boat engine for the winter.

Constituent Constructions

A boat booster must be available to every motor owner. Make a stand for the boat motor with your hands will not be difficult. Elements of the construction can be assembled from boards or metal. But wood materials will be preferable to processing. They are strong enough to withstand the load of the motor.

A stand for a removable outboard motor can be assembledof two-inch boards. To the pillars of the structure are attached lower support bars, connected by a crossbeam, and also by a sub-engine board. The large end of the strip is released in the direction of the suspension of the boat engine. Boat engine support with own hands (the photo is shown above) has struts. They are attached to the main supports on strong hinges and in the working position are fixed by two metal corners, rotating on bolts.

For convenience, you can make a shelf with rails,which will allow you to put tools, small parts or the necessary fasteners at the moment. The motor plate can be installed slightly at an angle. This will give more convenience.

Assembling the stand

Boat engine support with own hands is not collected for more than one evening. It will serve for a long time and is useful for different situations. The stand is designed for various types of pendant units.

The main material will be a tree. It is easy to process and easy to use. It is necessary to prepare wooden beams cross-section 45x60 mm, board size 45h250h350 mm, as well as fasteners, bolts, nuts, washers.

The bars should be strung from four sides andassemble in grooves. The support board for the removable boat engine is taken from solid wood. The parts are assembled on fasteners. Also, for better strength, the racks are greased with adhesive. Initially installed on the supports of the crossbeams, then glued pillars with stiffeners and with supports.

After the glue dries, you can install the board. For better and effective grip, the board is clamped in a vice and drilled 4 holes Ø10 mm for bolts 10x170. After tightening the nuts with a file or a sanding machine, the surface is sawn off flush. At the end of the mechanical work, the stand is covered with paint. After drying, the stand under the boat motor is ready.

Modifying the structure

If necessary boat support you can make it more mobile. To do this, from one edge of the rack you can attach small wheels from a trolley or a small bicycle. In the upper part of the design is attached a handle made of metal or wood, so that it is convenient to transport the motor when tilting. Modification of the design with small wheels will make it possible to move without difficulty, and also to bring the motor to the boat without unnecessary efforts.

Having considered the technology of creating a stand for the motor, each owner of this equipment will be able to produce a simple design with his own hands.