The scheme of installing a water meter in the apartment. How to install a water meter in the apartment

The scheme of installation of the counter of water in an apartmentis determined in the instruction manual for this water meter. The purpose of installation of these devices is to reduce the cost of paying for utilities to deliver cold and hot water to the apartment and to divert sewage from the apartment.

Does it make sense to install a water meter

As you know, the decision to install or notthe water meter is taken by the owner. However, every year the cost of a unit of water consumed by the standards increases. In this regard, citizens are increasingly beginning to think about the need to move away from the standards by introducing water meters into the apartments. Owners or tenants who pay utility bills will now need to get used to the fact that they will need to pay not only for the arrival of water, but also for its withdrawal. Moreover, the water disposal in our country is equal to the arrival, the cost of cooking is not taken into account, the fact that part of the water remains on the body when taking bath procedures, on the floor - during harvesting, etc. In addition, the installation of a counter contributes to a lower expenditure of this resource by management companies, since it becomes impossible to write off the work of worn-out networks uncontrollably on owners.

We prepare the water meter to the sidebar

How to install a water meter in the apartment? To do this, you must first attach a filter to this device, usually a coarse cleaning in order to protect against large debris and increase the service life. In addition to it, a non-return valve is installed, without which the meter can not be taken into operation.

When installing a water meter (it's also a water meter), you needcarefully examine the completeness. Together with him should go American women who protect the elements of the water supply and sanitation systems from spoilage when it is necessary to remove water meters.

The union nuts with the filter and check valve must be sealed, for which the use of a patch or FSM tape.

At the meter, the manufacturer shows the direction of the water by the arrow, so it is necessary to adhere strictly to it during installation.

Mounting the counter

It should be performed strictly according to the installation schemewater meter in the apartment. It is more convenient to install the meter in metal-plastic or polypropylene pipes. Elements of the latter are connected using a compact soldering iron.

How to install a water meter in the apartment? Following the instructions below, this is not difficult.

• Cut the pipe, connect the water meter to the cut off tap and seal it. We perform measurements and find where to install the return thread.
• Remove excess parts of the pipe, put the fitting or cut the thread.
• From the meter, detach the check valve, which is screwed onto the previously prepared thread.
• Tightly screw the American.
• To check the tightness of the threaded connections that were made during the installation, open the tap, which cuts the water pipe system from the riser.
• If there are no leaks, we call the inspector of the water dispenser or plumber from the management company.
• How to install a water meter in an apartment if the pipes are metal? Only using a metal saw and a threading machine.

Rules and procedure for installing meters for water

The requirements for the installation of a water meter are determinedthe current national standards of family P 50193, especially 1 and 2. Here, the general rules for the installation and monitoring of water meters have been established. The complete set of requirements for the installation of meters is determined by the management companies, where the method of sealing the water meter, the composition of equipment and the requirements for it as a whole and its individual components are determined.

In any case, the water consumption meter is mounted at the beginning of the water pipe, which is suitable for the apartment. The presence of a ball valve and a coarse filter is a mandatory requirement.

The water meter should be located so as to provide:

• access to it for the purpose of taking readings and verifying operability;
• viewing the dial;
• excluding the entry of various pollutants into the hull;
• the possibility of its sealing and verification;
• the possibility of removing it if necessary.

It is best to place this device in a vertical or horizontal position just before entering the apartment at a height of more than half a meter.

Self-installing

Russian legislation does not prohibitto install the water meter to the owner himself. How is the water meter installed by yourself? First of all, it is necessary to take into account that installation will require overlapping of water in the riser. When purchasing a meter, you need to check the availability of the data sheet. In case there is any malfunction, the one who decided to act independently will be responsible.

After purchase, the meter is checked in the controlan organization or another company that has an appropriate license. To do this, he is given there with a technical passport in which everyone will fill in and put a seal on the seal. The water meter is preferred to be mounted in the toilet or in the bathroom. If you have a kitchen far from these places, then you will have to put an extra meter.

Before starting the installation,order - from left to right: a stopcock, coarse filter, water meter, valve. When installing independently, look very carefully at the arrows on the counter, otherwise all your efforts can go to waste.

We connect the parts to determine the requirednumber of turns. We wind the seal on the filter. If you use a tow, you need to turn it into a cord no more than 1 mm thick. After the winding on the thread, we put the sanitary paste and twist the tap.

For a cold meter you need rubber gaskets,and for the hot - gaskets made of paronite. American we wind on the filter with a stick, with the valve we join the second branch pipe. We attach this construction to the counter. As a result, the pipe must be pointing downwards, the filter settler, the stopcock switch and the counter face must be turned up.

We cut the connected elements into the pipeline, measure the length and the same length from the connection point on the pipe and cut off the necessary part.

We attach the obtained construction to the pipeline.

At the end of the work we check the system.

Appeal to specialists

A competent scheme for installing a water meter inthe apartment will help to make up specialists. At the same time they must have a license for this type of activity, preference should be given to those who give a guarantee for the installation of the meter. In addition, before the installation, a contract is concluded, and after the reception of the work an act is signed.

Documents for the owner after installation

The act of receipt-transfer of the meter, where they are indicatedfactory numbers, installation date, water consumer. It is signed by all parties. There must also be a technical passport specifying the primary value of the flow, the installation date and the date of commissioning, in addition there must be a certificate of verification with the date of the next.

Finally

When you decide to mount a counter you need to clearlyDetermine the scheme of installing a water meter in the apartment. It can be installed independently or with the help of specialists. After installation, it is necessary to issue the required documents and undergo periodic verification.