Fibreboard plate - a great material for construction

Wood fiber board (Fiberboard), in fact, is a special way treated with wood shavings. The result is an even and sufficiently strong sheet material.

For the manufacture of this construction productalmost all wood fibers are used, as well as various wastes that are inevitable when processing wood. They include chips, bark, sawn timber, etc. All the raw materials presented are mixed and fed to a chopper, where it is converted into a homogeneous fine crumb suitable for further transformation. The wood fiber board itself is produced by hot pressing of the prepared raw materials, with the addition of special additives. So, there are two methods:

1. Dry. When the wood-fiber board is produced only by bonding the wood fibers together.

2. Wet. In this case, the ground weight of the fibers is mixed with special binders to increase strength and bending resistance. Most often in the role of such compounds synthetic resin is used.

The wood fiber board is available on anybuilding market in the widest range. In this regard, there is a classification in which the fiberboard differ in size, severity and purpose. Let's consider each of these groups in more detail.

Because the wood-fiber board canIt is used not only as a building and finishing, but also as an insulating material, according to the purpose, there are two types of plates that bear the appropriate names - finishing and insulating fiberboard. Their dimensions are defined by standards and can have a length of up to 5.5 meters.

Rigidity of fiberboard is determined by the composition of the mixture from which it is made. So, distinguish soft, semisolid, hard and super hard slabs.

Fibreboard of soft type widelyIt is used for sound and heat insulation of ceilings, walls and ceilings. In addition, it is used as a covering and leveling material, as well as as a filler for the door leaf.

Semi-solid and solid types have found wideapplication in the process of finishing the walls, they also act as a lining material under the floor covering. In the furniture industry, wood-fiber boards are used for the production of cabinets, shelves and boxes. In the automotive industry, interior lining of the passenger transport cabin is made of them.

The ultra-hard fibreboard is the most common electrical insulation material used for the production of panels and panels.

The density of this material also hassignificant influence on its characteristics, and therefore, on the field of use. Even if the aesthetic appeal can be sufficiently increased by coating with special films and solutions, inadequate internal filling can not withstand. Sometimes it threatens only a small marriage, but if the case is more complicated, the wrong plate can cause a critical situation.