Pyrolytic oven cleaning is one of several cleaning methods

No matter how carefully you did not operate the oven,its surfaces will inevitably remain burned fat. For safe and efficient operation it is necessary to clean the oven from time to time. To date, there are the following methods: pyrolytic cleaning of the oven, as well as hydrolytic and catalytic cleaning.

Manufacturers are constantly tryingimprove this procedure and do everything to clean the oven quickly, and at the same time spent the minimum forces of the hostess. To achieve this goal, special coatings are used, which are badly adhered to burnt fat, and advanced self-cleaning systems are being developed.

In the simplest models, noadditional systems, and therefore traditional cleaning of the oven is carried out, which involves the use of cleaning agents for ovens. Such tools are inexpensive and it is best to wet the surfaces to be cleaned before using them, so that burnt fat can be removed. This will greatly facilitate and speed up the cleaning procedure.

Companies such as Gorenje and Ardo usetheir ovens hydrolytic cleaning. It is based on the principle of hot steam, which helps soften the fat and dirt, which are then easily removed with a rag. At the same time, special acid-resistant enamel is used in such ovens, which, due to the smooth structure, does not allow penetrating deeply the dirt and grease.

The most common is catalyticThe cleaning method, which is used in the oven Ariston, Kaiser and others. The essence of this method in the use of a special enamel, which has an increased porosity, and due to this is the absorption of fat. During operation of the oven at temperatures of 200 ° C or more, it is split into soot and water. Thanks to this technology, the oven is cleaned constantly during operation. However, the disadvantage of this method is not a very high degree of purification. To wash such enamel it is possible and usual means of clearing, only it is impossible to use those in which there are abrasive materials.

The disadvantage of this cleaning method isa relatively short service life of enamel, it is about 5 years. For ease of use and prolongation of service life, removable panels are used, which can be quickly replaced. Recently began to use an ecolithic coating, which increases the service life of the product in half. In the case of the formation of persistent pollution, it is recommended to include such an oven empty and stand for about an hour.

The most effective, but at the same time mostexpensive is the pyrolytic cleaning of the oven. This method of cleaning is used by Electrolux, Bosch, Miele. It consists in heating the chamber to high temperatures (of the order of 500 ° C), with all the dirt and fat burned, and you will only have to clean the soot with the rag.

Pyrolytic oven cleaningexclusively in expensive electrical appliances. In gas ovens it is impossible to use it, since it is technically difficult to heat such an oven to the indicated temperatures.

The body of the product in which it is appliedpyrolytic cleaning of the oven, is made of high quality steel, as it must withstand repeated heating to high temperatures. Also, special attention is paid to the use of good thermal insulation and cooling of external parts, so as not to heat surrounding objects and to prevent injury to users.

Heat-resistant enamel and hardenedglasses, which are usually several pieces (from 3 or more). Despite this, when cleaning the oven its door can warm up to 70-80 ° C, so use special tacks to avoid injury. Also, during cleaning, it is necessary to remove baking sheets and dishes from the oven so that they are not damaged.