Machine on the radio for drift. What to look for when choosing
Usually a machine on the radio for driftis a mini-copy of the original car, which participates in competitions. Most of them are equipped with a rear and a front suspension. With the help of them, the machine can, drifting, make a turn in the right direction. Since such drift toys perform well enough, they are an excellent option not only for grown up children, but also for adults. With the help of such a machine you can feel yourself a driver and get though not very big, but a portion of adrenaline.
It is based on slip and skid, whichMan is controlled. From the outside it looks very simple, however in technology there are many different trifles. For example, it is recommended to keep the car closer to the edge of the track, while maintaining the maximum speed and ahead of the others. All this drags the pilots so much that these games turn into a real hobby, without which it is impossible to imagine your life.
The main characteristics of the machine for drift
First, the machine on the radio control for drifthas a four-wheel drive. Moreover, frequently occurring versions are made on a scale of 1 to 10 and even have an electric motor. Choosing such a toy, preference should be given to easy models. In this case, the behavior on the road of such a mini version is as close as possible to the usual real machines. Secondly, the machine on the radio control for drift has a special, more rigid rubber for sliding. And in most cases it can be changed if necessary to the usual. In other racing models installed are not as zhesktie tires, but they do not allow to perform the most important element of drift - slip.
The machine on the radio for drift is usuallyhas a more powerful motor. However, for this type of ride is not important speed mode, and torque. Therefore, the most suitable are 17- or 19-vector motors. Moreover, the machine can not drift without a properly tuned suspension. In the front the collapse is -4 degrees, behind the collapse is -0 degrees, while the wheels must be strictly perpendicular to the surface. If the settings are such, when sliding, the greatest possible contact of the surface with the front wheels is achieved and the least relationship with the rear wheels. Moreover, the machine on the radio control for drift has oil shock absorbers. It is recommended to use silicone oils with a sufficient degree of viscosity. It is desirable that their range is from 60wt to 80wt. If a person has just decided to buy a car on a radio control, then first it is desirable to choose a model with a more rigid spring behind and medium stiffness in front. With a more rigid level of depreciation, it will be possible to move to more rigid springs. However, it is worth remembering the rule: the back should always be installed springs are more rigid than in the front. Mandatory for successful drift is the correct location of the center of gravity - it should be lower, that is, the chassis must be pressed to the ground.
