Motoblock "Belarus 09N": characteristics and reviews
Most owners of suburban areas on theThe post-Soviet space is well known for its reliable Belarus-05N motoblock. This mini-tractor was used by villagers and homestead owners for almost three decades. At the moment, the 05H model has already been discontinued. Buy it from hand is still possible, but spare parts to get it is already quite problematic. MTZ 05N was replaced by a new, no less reliable and at the same time more modern improved Belarus Belarus 09N motoblock.
The company-manufacturer
The Minsk Tractor Plant,which produces this new model, has more than half a century of experience in assembling tractors and related equipment. To date, MTZ is among the eight largest producers of agricultural machinery. Its share in the world market of tractors is 10%.
Actually, this company produces motor blocks with1992. More than 400 units of this equipment are delivered monthly from the MTZ factories. Motoblocks "Belarus 09N" are supplied not only to the countries of the former USSR, but also to a number of states of South America.
General description of the model 09H
More modern appearance and improvedtechnical characteristics are what distinguishes the Belarus 09N motoblock from the previous model 05N. Reviews of farmers about this unit are also extremely positive.
It is a "Belarus 09N" universalThe unit intended for use mainly in small and medium-sized agricultural enterprises. Unlike conventional cultivators, with its application it is possible to perform a variety of agricultural works - from plowing the land to harvesting.
This convenient motoblock, if necessary, is easyturn even into a mini tractor. For this, a special adapter with a seat is used. If there is such an add-on, a summer resident or a farmer is able to perform agricultural work with maximum comfort. After all, in this case, you do not need to walk around the motor-block on foot. The advantages of the 09H model include, among other things, the fact that it is suitable for both adapters designed specifically for MTZ, as well as universal equipment of this type.
Scope of use
Use the Belarus 09N motoblock can be used for the following types of work:
- plowing of land in spring and autumn;
- hilling of potatoes and other root crops;
- harrowing the soil;
- harvesting of root crops.
Also, this unit, if there is an appropriateadditional equipment can be used as a haymower and snow blower or a communal brush. Many farmers will retrofit the Belarus 09N motoblock and a special cart. This allows the unit to be used, including for transportation of rather heavy and oversized cargo (up to 500 kg). Of course, using this model you can plow not only the usual fields, but also the virgin land. With this task, he copes without any problems.
Used motoblocks 09N not only on farms andhousehold plots. Wide application of this technique was also found in the communal economy. With its help, often landscaped with school territories, parks, streets, squares, etc. Sometimes these are used in large greenhouses.
Advantages of the model
The advantages of "Belarus 09N" include:
- strength of the hull (made of cast iron);
- presence of a backing;
- low noise level;
- ease of management;
- trouble-free operation;
- availability of reliable pneumatic wheels.
Motoblock MTZ "Belarus 09N", among other things, has such function as locking the steering wheel. When it is turned on, the unit easily passes the furrow without operator control.
Disadvantages motoblock
There are practically no drawbacks with the 09H model. Some of its disadvantages include basically only a certain complexity with changing speeds and disabling the differential. In addition, the gas regulator located on the right handle of the motor block, in the opinion of many farmers, is not very convenient to work with.
Another disadvantage of this model is a rather high price. Are standing motopahari "Belarus 09N" about 80 thousand rubles. At the same time, the price of attachments for them is also very high.
General specifications
Engineers plowman «Belarus 09N» canto be completed different. But most often this equipment is equipped with powerful, efficient and reliable Honda GX 270. The gearbox 09H is equipped with a multistage gearbox with permanent gear engagement. This design ensures not only the smooth running of the unit during operation, but also the durability of the gearbox itself.
Equipment | Characteristics |
Engine | "Honda GX270" (Japan) |
Number of front gears | 4 |
Number of reverse gears | 2 |
Rear / Forward travel speed | 3-5.35 / 2.6-11.4 km / h |
Plowman Clearance | 295 mm |
Adjustable track | 450, 600, 700 mm |
Maximum permissible trailer mass | 650 kg |
Engine power | 8.2 l / s (6kW) |
Revolutions | 3600 |
Fuel | A-92 |
Fuel consumption | 319 g / kW * h |
The weight | 176 kg |
Dimensions | 1780x850x1070 mm |
Petrol in the tank model "Belarus 09N" fits 5.3 liters.
Engine
Reliability in operation and long service life isthen, of course, the motoblock of MTZ "Belarus 09N" differs. The Honda GX 270 engine is a model that has proven itself above all because of the top position of the OHV valves. Motors of this design are very often used in a variety of types of construction equipment. Weigh motor motoblock "Belarus 09N" only 25 kg. The cylinder in it is located at an angle of 25 g, has a horizontal shaft and air cooling.
The advantages of this Japanese engine, among other things, include:
- ease of operation;
- simplicity of service;
- acceptable cost of consumables;
- optimal ratio of power, fuel consumption and efficiency.
Ignition in the Honda GX 270 engine implementedsimple transistor with a manual starter. Strength, and consequently, and a long life of the model provides the use of cast iron sleeves. The main consumables of this engine are an inexpensive air filter with a paper base and one spark plug.
Belarus 09N Motoblock with Honda engine: reviews of farmers
Since MTZ models have good technicalcharacteristics, are easy to use and have a long service life, the opinion about them among farmers is, of course, good. They are praised primarily for the possibility of very fast processing of fields with minimal physical costs. Many owners of countryside sites like the fact that the "Belarus 09N" units are allowed to be used not only on the open ground, but also on rather narrow row spacing. It weighs this motoblock, according to farmers, not too much, but this does not interfere with work at all. As the owners of such equipment say, stability and ease of movement ensures good balancing.
Even such a drawback as the complexity of the shutdowndifferential and gear changes, too much impact on the ease of management of the motor-block does not have. In addition, in the last installments of the units, this omission by the manufacturer was corrected. MTZ began to use for these models constructively designed components of the Italian brand START s.r.l.
To the unconditional advantages of such an aggregate asmotoblock "Belarus 09N" with a Honda engine, farmers, of course, include the possibility of using a variety of attachments. The economy of this model is another advantage, marked by the owners of suburban areas. In order to plow, for example, 20 acres of field for potatoes, using this motoblock, you need only three liters of fuel.
Opinion of the owners of suburban areas on the modification 09Н 02
Very good reviews of farmers earnedthe basic unit 09N, and the motoblock "Belarus 09N 02". This modification has a tank of 6 liters, anti-vibration handles and is equipped with a Kipor engine. The plow "Belarus 09H 02", like the base version, is a universal technique and can be used for performing a variety of agricultural works, as well as in the communal sector.
Brief instructions for use
As already mentioned, the use of the Belarus 09N Honda motoblock is very simple and convenient.
- To bring the unit into motion, you need to switch the engine to low speed, squeeze the clutch lever to the limit and put the necessary gear.
- To stop the motoblock, the gear lever is moved to neutral position.
When plowing, the operator should only directunit in the right direction. No special efforts are required to work with this equipment. Before starting the operation, the model should be run under light load on light work for 50 hours.
