GAZel transmission and its malfunctions

Gear box is on eachcar. Without it, no vehicle can move even one meter. As is known, at the moment there are several varieties of transmissions. These are robotic boxes, variative, as well as the most popular ones - automatic and mechanical. However, despite such a variety of species, the main function of the checkpoint remains unchanged. Each transmission provides the engine with an optimum operating mode depending on road conditions. Today we will consider why the GAZelle gearbox comes in a malfunction, and we will find out possible ways of solving this problem.

Causes of machine failures

Transmission of commercial vehiclesGAZ-3302 is distinguished by its endurance and high reliability. But, unfortunately, some drivers decide to test the reliability of their gearbox, thereby squeezing out of it all the juices. This action causes the spare part to malfunction, so it is not recommended to test the power of the transmission, since it is this part that transmits the torque to the wheels.

What happens if the attitude to this spare part is negligent?

GAZelle's gearbox does not like bullying,so if you do not want to face problems such as self-exclusion, a difficult transition from a reduced speed to a higher one and vice versa, it's better not to test its strength. By the way, this applies to all transmissions with which GAZ trucks are equipped - Valdai, Sobol and so on.

Noise in the box

Quite often after sharp jerks of speedsGAZel transmission is damaged (but not completely), and in the passenger compartment there is a constant noise and screeching. This indicates that this part needs to be diagnosed and subsequently repaired. Most often, extraneous sounds arise from heavily worn gears, shafts and bearings. But even if you operate the car under normal conditions and without jerks, the GAZel transmission can squeal because of the insufficient volume of engine and transmission oil. If this is not the case, the main problem is frequent overloading. How is this interconnected? Everything is very simple - under excessively high load the machine withstands strong pressure on the frame, rear axle, engine, and also on the synchronizer of the gearbox. Well, if the overload is combined with a dashing manner of driving, such a transmission will not last for a long time.

How can I extend the life of the gearbox?

Many drivers-GAZelists are asking this question. But there are no secrets: all that is needed for long and trouble-free operation of gears and shafts is timely diagnostics and troubleshooting, the use of high-quality oil in the gearbox, as well as compliance with the manufacturer's recommended load on the truck (no more than 1.5 tons per three-meter chassis and not more than 1.1 tons per four-meter modifications). Also, you need to change the clutch in time and not tear the gear. Follow these rules and then replacing the gearbox with a new one will definitely not be useful.